June 2015 - Public - talk.mikrotik.com.au

L3 over QinQ and a Bridge -- too far?
by Terry Sweetser 10 Sep '15

10 Sep '15

Hello Mikrotikians, I've been looking at this one for a while now. I have several hundred QinQ vlans heading into a single bridge group. ipv4 and ipv6 from the bridge interface into the individual links is working well. None of the ipv4 addresses can actually connect to or ping each other. Flags: X - disabled, R - running 0 R name="bridge136" mtu=auto actual-mtu=1500 l2mtu=1992 *arp=proxy-arp* mac-address=D4:CA:6D:01:38:C7 protocol-mode=none priority=0x8000 auto-mac=yes admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s transmit-hold-count=6 ageing-time=5m Flags: X - disabled, I - inactive, D - dynamic 0 interface=XXXXXX bridge=bridge136 priority=0x80 path-cost=10 edge=auto *point-to-point=yes* external-fdb=auto horizon=1 auto-isolate=no A bridge too far? _So, I'm looking for solution where the IPv* arrives at bridge136 and then goes straight back out the correct port.__ _ -- http://about.me/terry.sweetser

4 11

ccr1036
by Alex Samad - Yieldbroker 30 Jun '15

30 Jun '15

Hi Wondering if people have played with /queue> interface print detail On their phy interfaces ? Mine is set to only-hardware-queue, wondering why we are not using multi-queue-ethernet-default ? Alex

3 8

ANZ MikroTik User Meetings
by Mike Everest 29 Jun '15

29 Jun '15

Hi Guys, It's been a bit quiet here lately, so thought I'd send a brief post to everyone ;) I received an update from Janis @ MikroTik the other day reporting attendances at the recent MUM events in Melbourne and Wellington. Melbourne was attended by 162 people - that's numbers through the door :) Compared to 105 in Sydney (2013) and 126 in Brisbane (2011) that's an excellent turn-out! The presentations were top calibre, and I reckon that the event ran quite smoothly! There was some excellent detail in the "RouterOS developments" presentation by Janis Megis (MikroTik software engineer)which is well worth watching/reviewing in case you missed it. There is a full video of the Wellington event here: https://www.youtube.com/watch?v=ML0tr-9zTw0 Melbourne event (plus individual presentations from NZ) will be available on the MikroTik channel 'soon' here: http://tiktube.com/ Cheers! Mike.

1 1

ccr1036-8g watchdog timer
by Alex Samad - Yieldbroker 23 Jun '15

23 Jun '15

Hi I had one of my ccr's dye last night, just locked up, very annoying had just finished dinner ! /system watchdog> print watch-address: none watchdog-timer: yes no-ping-delay: 5m automatic-supout: yes auto-send-supout: no why didn't this kick in ? I'm not watching an address but I do have the timer on ? should have I expected this to have auto restarted. When I got to the box the touch wasn't working !

2 3