February 2017 - Public - talk.mikrotik.com.au

scripting
by Alex Samad - Yieldbroker 07 Feb '17

07 Feb '17

Hi I have this I a test.rsc file which I scp over and then I do /import test.rsc But it doesn't print anything for the variable # set local hostname :global hostname [/system identity get name] :if ( $hostname = "artr1" ) \ do={ :global LocalIP 192.168.0.1 :global ManagementIP 1.3.8.72 :global PublicIP 2.7.3.67 :global PrivateIP 1.3.200.10 :global RouterID 1.3.255.10 } :if ( $hostname = "artr2" ) \ do={ :global LocalIP 192.168.0.2 :global ManagementIP 1.3.8.73 :global PublicIP 2.7.3.68 :global PrivateIP 1.3.200.11 :global RouterID 1.3.255.11 } :if ( $hostname = "bextrtr1" ) \ do={ :global LocalIP 192.168.0.1 :global ManagementIP 1.3.8.70 :global PublicIP 2.7.3.69 :global PrivateIP 1.3.200.12 :global RouterID 1.3.255.12 } :if ( $hostname = "bextrtr2" ) \ do={ :global LocalIP 192.168.0.2 :global ManagementIP 1.3.8.71 :global PublicIP 2.7.3.70 :global PrivateIP 1.3.200.13 :global RouterID 1.3.255.13 } # vrrp dgw :global PublicVRRPIP 2.7.3.71 # # Validate variables # :put "Hostname: $hostname" :put "Local IP: $LocalIP" :put "Management IP: $ManagementIP" :put "Public IP: $PublicIP" :put "Private IP: $PrivateIP" :put "Routerid: $RouterID"

5 6

issues with VRF
by Alex Samad - Yieldbroker 06 Feb '17

06 Feb '17

Hi So been doing some testing around the routing and separation of the VRF's. So I have VRF Management - ether port Private - this is a point to point with clients Public - Isp I have added the relevant interfaces to the relevant Vrf in the /ip route vrf section I have tried testing with ping to 8.8.8.8 So test machine on the Private vlan setup static route 8.8.8.8/32 via 10.10.10.10 (my new router) I do a /ip route print detail where routing-marl=private 8.8.8.8 in dst-address It only shows me the default gateway... But /tool quick snif quick ip-address=8.8.8.8 shows the icmp coming in on Private and out Public ????????? This might just be icmp packets ! Did another test from my mgmt. box setup static route Ip r a 8.8.8.8/32 via 10.20.10.10 Ping and I can see packets heading out Public But telnet 8.8.8.8 and it doesn't go anywhere In fact the reply icmp comes from the main table, looking at the ICMP .... Alex

2 2

wifi
by Alex Samad - Yieldbroker 03 Feb '17

03 Feb '17

Hi Does mikrotek have something like this The UniFi AP AC HD (UAP-AC-HD<https://unifi-hd.ubnt.com/>) is now available. Comes in at a higher price point, aimed at high density deployments. * 802.11ac Wave 2 * MU-MIMO * 2.4 GHz: 800 Mbps (4x4) * 5 GHz: 1733 Mbps (4x4) * dual gigabit ethernet, supporting link aggregation * power: 802.3at (PoE+) * datasheet: https://dl.ubnt.com/datasheets/unifi/UniFi_UAP-AC-HD_DS.pdf

2 5

Configuration Management Solutions
by Andrew Gilbett 02 Feb '17

02 Feb '17

Hi All, What is everyone using for configuration management, backup and change control? I am looking for something that is automated and provides version control... I found https://github.com/shift8nix/mtrcbackup which looks good has anyone used it or are there better tools out there? Andrew

4 3

Re: [MT-AU Public] Configuration Management Solutions
by Jeremy Hall 02 Feb '17

02 Feb '17

In addition to Rancid, you could also check out Oxidized (a modern Rancid replacement): https://github.com/ytti/oxidized It integrates with LibreNMS (also an Observium replacement!) > ---------- Forwarded message ---------- > From: Damien Gardner Jnr <rendrag(a)rendrag.net> > To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> > Cc: > Date: Wed, 1 Feb 2017 21:17:53 +1100 > Subject: Re: [MT-AU Public] Configuration Management Solutions > I don't know about others, but I just use rancid, as then all of my > switch/router configs are in the one place. And it integrates into > Observium nicely :) > > On 1 February 2017 at 21:16, Andrew Gilbett <andrew(a)gilbett.net> wrote: > > > Hi All, > > > > What is everyone using for configuration management, backup and change > > control? > > > > I am looking for something that is automated and provides version > > control... > > > > I found https://github.com/shift8nix/mtrcbackup which looks good has > > anyone > > used it or are there better tools out there? > > > > Andrew > > _______________________________________________ > > Public mailing list > > Public(a)talk.mikrotik.com.au > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > > -- > > Damien Gardner Jnr > VK2TDG. Dip EE. GradIEAust > rendrag(a)rendrag.net - http://www.rendrag.net/ > -- > We rode on the winds of the rising storm, > We ran to the sounds of thunder. > We danced among the lightning bolts, > and tore the world asunder > > > > ---------- Forwarded message ---------- > From: Andrew Cox <andrew.cox(a)brightwifi.com> > To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> > Cc: > Date: Wed, 1 Feb 2017 07:58:50 -0600 > Subject: Re: [MT-AU Public] Configuration Management Solutions > I've been getting ready to move over to Unimus now which is an "every > network device" backup system written by Tomas of the Brothers WISP group. > > - Andrew > > On 1 Feb. 2017 4:18 am, "Damien Gardner Jnr" <rendrag(a)rendrag.net> wrote: > > > I don't know about others, but I just use rancid, as then all of my > > switch/router configs are in the one place. And it integrates into > > Observium nicely :) > > > > On 1 February 2017 at 21:16, Andrew Gilbett <andrew(a)gilbett.net> wrote: > > > > > Hi All, > > > > > > What is everyone using for configuration management, backup and change > > > control? > > > > > > I am looking for something that is automated and provides version > > > control... > > > > > > I found https://github.com/shift8nix/mtrcbackup which looks good has > > > anyone > > > used it or are there better tools out there? > > > > > > Andrew > > > _______________________________________________ > > > Public mailing list > > > Public(a)talk.mikrotik.com.au > > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk. > mikrotik.com.au > > > > > > > > > > > -- > > > > Damien Gardner Jnr > > VK2TDG. Dip EE. GradIEAust > > rendrag(a)rendrag.net - http://www.rendrag.net/ > > -- > > We rode on the winds of the rising storm, > > We ran to the sounds of thunder. > > We danced among the lightning bolts, > > and tore the world asunder > > _______________________________________________ > > Public mailing list > > Public(a)talk.mikrotik.com.au > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > _______________________________________________ > Public mailing list > Public(a)talk.mikrotik.com.au > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > >

1 0

VRF and BGP
by Alex Samad - Yieldbroker 01 Feb '17

01 Feb '17

Hi Next step. I want to setup a iBGP peer and I want all the bgp routes learn and distributed to be linked to the VRF internet Seems like I have to choices /routing bgp instance I can add an instance and use routing-table. Or I can add a /routing bgp instance vrf entry after add one to /routing bgp instance but leaving routing-table as main So I want all the BGP routes received and sent to be only from vrf internet. So which one do I use ! Pro's cons. The wiki page is not that informative Alex

2 5