March 2017 - Public - talk.mikrotik.com.au

UPS Serial Cable
by Paul Julian 29 Jun '17

29 Jun '17

Hi guys, we have got some APC UPS's with the serial DB9 connections on them but need to connect them to Mikrotik RB2011 and RB1100AHx2 models. Does anybody have any suggestions on a cable to suit ? The problem is they are both setup to be the B end of the situation and not the MT setup to be the A end and the UPS as the B end. I was thinking of a gender bender but don't really want to do that if I don't have to..... Any thoughts would be appreciated. Thanks Paul

6 10

EoIP
by Jason Hecker (Up & Running Tech) 26 Mar '17

26 Mar '17

Hi Mike I was just looking at your EoIP article https://shop.duxtel.com.au/article_info.php?articles_id=45&osCsid=s28vgpuoi… and was thinking about how it relates to NV2 nowadays. My experience has shown that NV2 seems to support priorities (based on DSCP with a mangle rule) and also I can pass VLAN tagged traffic over it without any issues (I am told this wasn't always the case). With a pure PtP link is it necessary to use your supplied PtP/EoIP scripts or will NV2 do the job just fine now seeings as it seems to pass bridge ethernet frames unmolested? Jason Hecker -- <https://www.upandrunningtech.com.au>

4 4

Sierra Wireless (Telstra Aircard) 320U 4G Modem - SOLUTION
by Paul Julian 24 Mar '17

24 Mar '17

Hi All, we have been using the Sierra Wireless 320U 4G USB modem and a Mikrotik hAP routers for a while now for out of band management on our network, I remember when we first got the modems and plugged them into a routerboard that we had lots of problems getting them working, then there was the mucking about with PPP or LTE etc etc. Anyway we just bought another 20 of them for more of our sites and I faced the same issue again of not being able to get them to work, so when I finally figured out the issue I thought I would share the details here so that it benefited anybody who needed the information. So this device when plugged into a Mikrotik Router USB port will show up as an LTE interface, you shouldn't need to cold boot the device or anything once it's inserted as some people say, the interface should just appear, this is from my experience anyway on 6.35.x version of ROS with a hAP or RB2011 series. If the interface doesn't appear check to make sure you have the "Ignore DirectIP Modem" checkbox NOT ticked under System/Ports/Firmware, you need to have this unticked for it to work. Once you have the interface appearing the only other settings you need to change are to set the APN within the lte1 interface, and add a DHCP client to the Interface to get your IP address from Telstra. If you have organised it when ordering your SIM, telstra.extranet APN will give you a dynamic public IP or telstra.internet APN will give you a dynamic NAT'd private IP, we chose the former so that we could get into the routers remotely, there is no static public IP option in case you were wanting that..... Now, if you have got to this point and are saying that your device is appearing when you plug it in but doesn't get an IP or the lights do funny stuff then read on. These devices have a feature which kicks off the Telstra software installation when you plug it in, unfortunately this feature breaks the process when you plug it into a Mikrotik routerboard, so to disable that feature you need to do the following. Plug the modem into your Windows PC, install the Telstra Mobile Broadband software when it prompts you to. Once it's installed and the device has been discovered and it's ready to connect (Green Connect Now button is visible) go to the Tools menu, then Options, then Account tab, down the bottom you will see a tickbox called "Disable SWOC", tick that box, then click the Apply button, then OK to exit. Unplug the device from your PC and plug it into your Routerboard and then it should work fine. I can't include the image I have for information about the lights on the modem as attachments aren't allowed, but basically you want the power light to be solid BLUE and once it's connected to the network you want the data light to be solid GREEN, this indicates a connection to the LTE network, so faster speeds. I hope this has been useful to somebody J Regards Paul

4 4

Mikrotik PPP Profile and Radius
by Paul Julian 23 Mar '17

23 Mar '17

Hi All, just wondering if anybody has ever had any luck with being able to set the PPP Profile for a radius user by using a Radius reply attribute ? People say it can't be done, there is no attribute listed in the AAA doco but hoping somebody might know of a way we could do it.... Thanks Paul

4 17

NBN Woes
by Ben Jackson - eLogik 22 Mar '17

22 Mar '17

Obviously I have a lot of customers who use Mikrotik devices as their main router. This is causing issues with the NBN's default method of delivering VOIP services as the short-sighted ISP's have all made the laughable assumption that everyone is going to use an ISP-provided CPE to plug their VOIP handset into. As you know these devices will pre-configure the SIP settings. For so many reasons, this of course is not the preferred setup, but it is left to me and others like me to explain why all of a sudden the VOIP service that comes bundled with the ISP's plan will not work with their equipment. I've been told that ISP's will not release the VOIP settings to end-users to facilitate the setup of a stand alone ATA such as the cisco SPA112. I'd just be interested to know how people are dealing with this situation. Cheers, Ben Jackson eLogik m:0404 924745 e: ben(a)elogik.net w: www.elogik.com.au [image: http://www.elogik.com.au] <http://www.elogik.com.au>

4 9

CCR1072
by Alex Samad 22 Mar '17

22 Mar '17

Hi Thought I would share my experience from the last couple of days. I was trying to provision a new 1G service onto one of these. Some reason couldn't get L2 going. So it works out that you have to turn off auto-negotiate and set the speed manually when using a 1G SFP in a 10G SFP+ port on the CCR1072 .. Alex

2 2

VRF & BGP
by Matthew Enger 21 Mar '17

21 Mar '17

Hello, I have two mikrotik routers with the internet public networks in a VRF and bgp running happily until I tried to add a second router which also had its internet network in a VRF. BGP just sits there at connect. If I remove the VRF on one of them, it all of a sudden connects. If the BGP desintation is not inside a VRF (well I assume it is not or the other end is not mikrotik, it works fine). I emailed mikrotik support and apparently there is a known issue with connecting two bgp peers if both ends are inside a vrf. Anyone else seen this and have any work arounds? I am running MPLS on the same router so I would prefer to keep the public internet on its own VRF. Matthew Enger | Managing Director PO Box 3279, The Pines, Victoria, 3109 T 1300 789 299 D 03 9909 3104 M 0406 532 792 F 03 8611 7946 m.enger(a)xi.com.au | www.xi.com.au This email message and any attachments are the property of X Integration. The contents of this email are copyright and may also be confidential and/or legally privileged. They are intended solely for the addressee and it is not intended that either confidentiality or privilege be waived or lost by mistaken delivery to you. Please notify us immediately and delete this communication if received in error. Consider the environment before printing this email.

3 4

SanDisk with CCR
by Alex Samad 20 Mar '17

20 Mar '17

Hi I have a ultra MicroSD card and it doesn't seem to register in my CCR 1072 and 1036s I insert and then go to /disk ... nothing there nothing in the logs either Any suggestions A

2 4

NBN VDSL
by Denis Hancock 19 Mar '17

19 Mar '17

Hi All We're starting to see some NBN rollout to our customers. Preference is to have the Mikrotik do all the work, any recommendations for VDSL modems ? -- *Denis Hancock*

12 16

Max Routed Throughout x86
by Dave Browning 18 Mar '17

18 Mar '17

Hi, What sort of speeds are people able to push (routed) through x86 routers before seeing TX/RX Errors/Drops? Underlying being ESX 6. Dave Browning | Network Engineer P 07 3369 7666 Level 1, 12 Railway Tce, Milton QLD 4064 This email and any files transmitted with it contain confidential information for the exclusive use of the intended recipient. If you received this email in error please notify Sentrian Pty Ltd immediately by return email to the sender and delete the original email. We do not guarantee that this email or any attached files are free of viruses. All recipients should undertake their own virus scanning.

4 22