January 2021 - Public - talk.mikrotik.com.au

State of 3G/4G fallback on MikroTik?
by Karl Auer 01 Sep '21

01 Sep '21

We need to quote to a client for two routers capable of running a VPN between two sites - easy, that's a MikroTik. But they want a fallback to 3G/4G so that the site that falls back keeps Internet access AND so that the VPN keeps running. What's the state of MikroTik 3G/4G fallback? Last I looked it seemed very roll-your-own, and supported only a few very specific dongles... Ideally it would work like the (vastly more expensive) Merakis and just fail everything over to the secondary link if the primary fails, where "fail" would be either a ping test or interface down. That said, I'm OK with a solution that needs more work, as long as once done it is set-and-forget. Any pointers? Regards, K. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Karl Auer (kauer(a)nullarbor.com.au) work +61 2 64957435 http://www.nullarbor.com.au mobile +61 428 957160 GPG fingerprint: 887A DA07 4DCC EE76 B413 27D4 C638 4189 6CF0 D556 Old fingerprint: 8454 EE43 6215 B6DD 1B4D 9D8D 984D 7BA1 7378 A38D

7 12

IPv6 over Telstra 4G
by Chris Lee 01 Feb '21

01 Feb '21

Hi All, I'm running a Mikrotik 750G r3 Hex on 6.48 and using ether1 for an NBN connection which leases an IPv6 address and /56 prefix fine. On ether2 I have a Netgear LB2120 4G router in bridge mode with a Telstra prepaid SIM, using the telstra.internet APN and configured the PDP for IPV4V6. I've got the same IPv6 firewall rule setup for ether2 as I do ether1, yet I cannot lease an IPv6 address from it. ether2 has no problems leasing an IPv4 (Telstra CGNAT) address. Has anyone had any success in getting IPv6 working on a Telstra prepaid 4G service? Relevant IPv6 configs below /ipv6 dhcp-client add add-default-route=yes interface=ether1 pool-name=superloop request=address,prefix use-peer-dns=no add interface=ether2 pool-name=telstra request=address,prefix use-peer-dns=no /ipv6 firewall filter add action=accept chain=input comment="Accept ICMPv6 to Router" in-interface=ether1 protocol=icmpv6 add action=accept chain=input comment="Accept ICMPv6 to Router from LTE" in-interface=ether2 protocol=icmpv6 add action=accept chain=input comment="Accept DHCPv6 to Router" dst-port=546 in-interface=ether1 log=yes protocol=udp add action=accept chain=input comment="Accept DHCPv6 to Router from LTE" dst-port=546 in-interface=ether2 log=yes protocol=udp add action=accept chain=input comment="defconf: accept UDP traceroute" port=33434-33534 protocol=udp add action=accept chain=input comment="Accept IPv6 established,related to Router" connection-state=established,related in-interface=ether1 add action=accept chain=input comment="Accept IPv6 established,related to Router from LTE" connection-state=established,related in-interface=ether2 add action=drop chain=input comment="Deny ALL to Router" in-interface=ether1 add action=accept chain=forward comment="Accept ICMPv6 to LAN" in-interface=ether1 protocol=icmpv6 add action=drop chain=forward comment=invalid connection-state=invalid in-interface=ether1 log=yes log-prefix=ipv6,invalid add action=accept chain=forward comment="Accept IPv6 established,related to LAN" connection-state=established,related in-interface=ether1 add action=drop chain=forward comment="Deny ALL to LAN" in-interface=ether1 Thanks, Chris

1 0

Wi-Fi site planning and verification.
by Malcolm Faed 27 Jan '21

27 Jan '21

Hi All, I am looking for a tool to help with Wifi planning and verification. We would like a tool that can overlay on a map or floor plan for outdoor and indoor use with heat map visualization. Something that can help us to plan the location of APs and also to validate that after an installation the area is sufficiently covered. Can anyone suggest or recommend such a tool. TIA. Mal *Malcolm Faed.* Broadcast Network Engineer *Av-Comm* avcomm.com.au malcolm(a)avcomm.com.au 24/9 Powells Road, Brookvale, NSW 2100, Australia P: +61 (2) 9939 4377 M: +61 409 601 747 [image: Twitter] <https://twitter.com/AvCommSatellite> <https://plus.google.com/+AvcommAustralia/>[image: Youtube] <https://www.youtube.com/channel/UCO8ZtcnwoTH7e54LAndE-yw>[image: Linkedin] <https://www.linkedin.com/company-beta/6583589/> This e-mail message may contain confidential or legally privileged information and is intended only for the use of the intended recipient(s). Any unauthorised disclosure, dissemination, distribution, copying or the taking of any action in reliance on the information herein is prohibited. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, or contain viruses. Anyone who communicates with us by e-mail is deemed to have accepted these risks. Av-Comm is not responsible for errors or omissions in this message and denies any responsibility for any damage arising from the use of e-mail. Any opinion and other statement contained in this message and any attachment are solely those of the author and do not necessarily represent those of the company.

4 3

Axiom Cyber Shield
by Philip Loenneker 27 Jan '21

27 Jan '21

Hi all, After seeing their presentation at the Melbourne MUM, we've been having a look at Axiom Cyber Shield. Is anyone on here using it and happy to provide some feedback, on-list or off-list? It certainly sounds like a good product, but I only seem to be able to find sales pitch information, not unbiased reviews. Regards, Philip Loenneker | Network Engineer | TasmaNet 40-50 Innovation Drive, Dowsing Point, Tas 7010, Australia P: 1300 792 711 philip.loenneker(a)tasmanet.com.au<mailto:philip.loenneker@tasmanet.com.au> www.tasmanet.com.au<http://www.tasmanet.com.au/>

3 7

Re: [MT-AU Public] Public Digest, Vol 81, Issue 6
by Matt Hall 20 Jan '21

20 Jan '21

I spoke to https://wisp.net.au/ today. They have the lte versions coming in next week. On Wed, 20 Jan 2021 at 12:00, <public-request(a)talk.mikrotik.com.au> wrote: > Send Public mailing list submissions to > public(a)talk.mikrotik.com.au > > To subscribe or unsubscribe via the World Wide Web, visit > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > or, via email, send a message with subject or body 'help' to > public-request(a)talk.mikrotik.com.au > > You can reach the person managing the list at > public-owner(a)talk.mikrotik.com.au > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Public digest..." > > > Today's Topics: > > 1. hAP ac3 (Dave Browning) > 2. Re: hAP ac3 (Jason Hecker) > 3. Re: hAP ac3 (Malcolm Faed) > 4. Re: hAP ac3 (Dave Browning) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 20 Jan 2021 09:05:39 +1000 > From: Dave Browning <dave(a)dlbnetworks.com> > To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> > Subject: [MT-AU Public] hAP ac3 > Message-ID: <6cf5bd44-3258-2bac-408e-f8089ad3039b(a)dlbnetworks.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > Team, > > There is an obvious shortage of hAP ac^3 's going on. > Does anyone know if there is a secret stash in Aus anywhere? > > Cheers, > Dave > > > ------------------------------ > > Message: 2 > Date: Wed, 20 Jan 2021 10:13:43 +1100 > From: "Jason Hecker" <jason(a)upandrunningtech.com.au> > To: public(a)talk.mikrotik.com.au > Subject: Re: [MT-AU Public] hAP ac3 > Message-ID: <97f54a78-c277-421e-9f35-d19e9a94b99d(a)www.fastmail.com> > Content-Type: text/plain > > > https://streakwave.com.au/shop/product/rbd53ig-5hacd2hnd-mikrotik-rbd53ig-5… > > Seems ok. Doesn't say it's out of stock. > > > > Regards, > Jason Hecker > <https://www.upandrunningtech.com.au/> > <https://www.upandrunningtech.com.au/> > > > On Wed, 20 Jan 2021, at 10:05, Dave Browning wrote: > > Team, > > > > There is an obvious shortage of hAP ac^3 's going on. > > Does anyone know if there is a secret stash in Aus anywhere? > > > > Cheers, > > Dave > > _______________________________________________ > > Public mailing list > > Public(a)talk.mikrotik.com.au > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > ------------------------------ > > Message: 3 > Date: Wed, 20 Jan 2021 10:14:53 +1100 > From: Malcolm Faed <malcolm(a)avcomm.com.au> > To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> > Subject: Re: [MT-AU Public] hAP ac3 > Message-ID: > < > CAOnABO2yKkMUTT-r5jUQKmkXDRaKkYFDSwMZpO0TFHx8O6DcZw(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Great timing. I was looking just now as well. :) > > *Malcolm Faed.* > Broadcast Network Engineer > > *Av-Comm* > avcomm.com.au > malcolm(a)avcomm.com.au > 24/9 Powells Road, Brookvale, NSW 2100, Australia > P: +61 (2) 9939 4377 > M: +61 409 601 747 > > [image: Twitter] <https://twitter.com/AvCommSatellite> > <https://plus.google.com/+AvcommAustralia/>[image: Youtube] > <https://www.youtube.com/channel/UCO8ZtcnwoTH7e54LAndE-yw>[image: > Linkedin] > <https://www.linkedin.com/company-beta/6583589/> > > This e-mail message may contain confidential or legally privileged > information and is intended only for the use of the intended recipient(s). > Any unauthorised disclosure, dissemination, distribution, copying or the > taking of any action in reliance on the information herein is prohibited. > E-mails are not secure and cannot be guaranteed to be error free as they > can be intercepted, amended, or contain viruses. Anyone who communicates > with us by e-mail is deemed to have accepted these risks. Av-Comm is not > responsible for errors or omissions in this message and denies any > responsibility for any damage arising from the use of e-mail. Any opinion > and other statement contained in this message and any attachment are solely > those of the author and do not necessarily represent those of the company. > > > On Wed, 20 Jan 2021 at 10:08, Dave Browning <dave(a)dlbnetworks.com> wrote: > > > Team, > > > > There is an obvious shortage of hAP ac^3 's going on. > > Does anyone know if there is a secret stash in Aus anywhere? > > > > Cheers, > > Dave > > _______________________________________________ > > Public mailing list > > Public(a)talk.mikrotik.com.au > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > ------------------------------ > > Message: 4 > Date: Wed, 20 Jan 2021 09:34:16 +1000 > From: Dave Browning <dave(a)dlbnetworks.com> > To: public(a)talk.mikrotik.com.au > Subject: Re: [MT-AU Public] hAP ac3 > Message-ID: <5dcf3d47-7f0f-36ee-d38b-947014434a5c(a)dlbnetworks.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > Nup, none there either. > > > On 20/01/2021 9:31 am, Streakwave Sales wrote: > >> Hi Dave, > >> > >> Eta for them will be the end of the month. > >> > >> > > On 20/01/2021 9:13 am, Jason Hecker wrote: > > > https://streakwave.com.au/shop/product/rbd53ig-5hacd2hnd-mikrotik-rbd53ig-5… > > > > Seems ok. Doesn't say it's out of stock. > > > > > > > > Regards, > > Jason Hecker > > <https://www.upandrunningtech.com.au/> > > <https://www.upandrunningtech.com.au/> > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > Public mailing list > Public(a)talk.mikrotik.com.au > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > ------------------------------ > > End of Public Digest, Vol 81, Issue 6 > ************************************* > -- Matt MAC, PC, Smartphone & Multimedia Consulting, Training, Support & Fix-it scream*S*aver "When You Just Want *IT* to Work" mobile 0412 067 226 email matt(a)screamsaver.net

2 1

hAP ac3
by Dave Browning 20 Jan '21

20 Jan '21

Team, There is an obvious shortage of hAP ac^3 's going on. Does anyone know if there is a secret stash in Aus anywhere? Cheers, Dave

4 4

Re: [MT-AU Public] Public Digest, Vol 81, Issue 3
by Chris Herrmann 11 Jan '21

11 Jan '21

Hi Malcolm, it's been a very long time since I used any fortiwifi kit, because my experience was so bad... I like the fortigate firewalls, but can't recommend their other stuff. Also the 30 series will be the bottom of the range. I for testing / learning, but I would never attempt to use a 30 series in production. Learnt that the hard way. In my experience you're generally better off going a model "up" if you want to use the full utm. Utm is both memory and cpu intensive. Regards, Chris > On 11 Jan 2021, at 12:00, public-request(a)talk.mikrotik.com.au wrote: > > Send Public mailing list submissions to > public(a)talk.mikrotik.com.au > > To subscribe or unsubscribe via the World Wide Web, visit > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > or, via email, send a message with subject or body 'help' to > public-request(a)talk.mikrotik.com.au > > You can reach the person managing the list at > public-owner(a)talk.mikrotik.com.au > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Public digest..." > > > Today's Topics: > > 1. Re: Axiom Cyber Shield (Malcolm Faed) > 2. Re: Axiom Cyber Shield (Mike Everest) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 11 Jan 2021 09:14:41 +1100 > From: Malcolm Faed <malcolm(a)avcomm.com.au> > To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> > Subject: Re: [MT-AU Public] Axiom Cyber Shield > Message-ID: > <CAOnABO2Ny74EnDMiwO9io5d9wUXHNG8kf3Hhc7UEszPSRANBxA(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hi all, > > Thanks Mike, > > Yes that helps. I was asked to see if we could use a MT solution to go up > against a FortiWiFi 30E > > It seems the Axiom Cyber Shield would go some way toward meeting the > functionality of the Fortigate. > > Cheers, > > *Malcolm Faed.* > Broadcast Network Engineer > > *Av-Comm* > avcomm.com.au > malcolm(a)avcomm.com.au > 24/9 Powells Road, Brookvale, NSW 2100, Australia > P: +61 (2) 9939 4377 > M: +61 409 601 747 > > [image: Twitter] <https://twitter.com/AvCommSatellite> > <https://plus.google.com/+AvcommAustralia/>[image: Youtube] > <https://www.youtube.com/channel/UCO8ZtcnwoTH7e54LAndE-yw>[image: Linkedin] > <https://www.linkedin.com/company-beta/6583589/> > > This e-mail message may contain confidential or legally privileged > information and is intended only for the use of the intended recipient(s). > Any unauthorised disclosure, dissemination, distribution, copying or the > taking of any action in reliance on the information herein is prohibited. > E-mails are not secure and cannot be guaranteed to be error free as they > can be intercepted, amended, or contain viruses. Anyone who communicates > with us by e-mail is deemed to have accepted these risks. Av-Comm is not > responsible for errors or omissions in this message and denies any > responsibility for any damage arising from the use of e-mail. Any opinion > and other statement contained in this message and any attachment are solely > those of the author and do not necessarily represent those of the company. > > >> On Sat, 9 Jan 2021 at 13:56, Mike Everest <mike(a)duxtel.com> wrote: >> >> Hi Mal and all, >> >> We did run an evaluation subscription for a while, and can confirm that it >> certainly 'works as advertised' but in the end we found that the reporting >> data (at the time valuated) was rudimentary at best and we thought it was >> difficult to find the value in a USD300/year subscription cost per router. >> >> The analytics essentially came down to "we detected 'x' packets of type 'y' >> during the Last month". We didn't detect any noticeable change in network >> or generic attack activity while running it, but it could easily depend on >> the type of network node and profile of the operator... >> >> It's not something that I would recommend that /everyone/ needs to sign up >> to for every router they manage, but it is definitely a reasonable option >> for those who are actively seeking that kind of service :) >> >> Does it help? >> >> Cheers, Mike. >> >> ---------------------------------------------------------------------------- >> -------- >> Why Choose DuxTel for all your MikroTik needs? >> 10 good reasons: http://duxtel.com/why_duxtel >> >> ---------------------------------------------------------------------------- >> -------- >> Follow our tweets for news and updates: http://twitter.com/duxtel >> >> >> >> >>> -----Original Message----- >>> From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of >>> Malcolm Faed >>> Sent: Thursday, 7 January 2021 2:31 PM >>> To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> >>> Subject: Re: [MT-AU Public] Axiom Cyber Shield >>> >>> Hi Philip and Mike, >>> >>> Two and a half years later..... >>> Did you end up running it? >>> I am interested in it and wondering if it has been worthwhile. >>> If you subscribed to the analytics, do you find it useful? >>> >>> Cheers, >>> Mal >>> >>> *Malcolm Faed.* >>> Broadcast Network Engineer >>> >>> *Av-Comm* >>> avcomm.com.au >>> malcolm(a)avcomm.com.au >>> 24/9 Powells Road, Brookvale, NSW 2100, Australia >>> P: +61 (2) 9939 4377 >>> M: +61 409 601 747 >>> >>> [image: Twitter] <https://twitter.com/AvCommSatellite> >>> <https://plus.google.com/+AvcommAustralia/>[image: Youtube] >>> <https://www.youtube.com/channel/UCO8ZtcnwoTH7e54LAndE-yw>[image: >>> Linkedin] <https://www.linkedin.com/company-beta/6583589/> >>> >>> This e-mail message may contain confidential or legally privileged >>> information and is intended only for the use of the intended >> recipient(s). >>> Any unauthorised disclosure, dissemination, distribution, copying or the >>> taking of any action in reliance on the information herein is prohibited. >>> E-mails are not secure and cannot be guaranteed to be error free as they >> can >>> be intercepted, amended, or contain viruses. Anyone who communicates >>> with us by e-mail is deemed to have accepted these risks. Av-Comm is not >>> responsible for errors or omissions in this message and denies any >>> responsibility for any damage arising from the use of e-mail. Any opinion >> and >>> other statement contained in this message and any attachment are solely >>> those of the author and do not necessarily represent those of the >> company. >>> >>> >>>> On Wed, 4 Jul 2018 at 16:15, Mike Everest <mike(a)duxtel.com> wrote: >>> >>>> G'day! >>>> >>>> We've been running it on one of our development routers for a couple >>>> of weeks, still getting to know the system and how it all works, but >>>> looking very good so far! :) >>>> >>>> (we are considering becoming their premier partner for Australia ;) >>>> >>>> Cheers! >>>> >>>>> -----Original Message----- >>>>> From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf >>>>> Of >>>> Philip >>>>> Loenneker >>>>> Sent: Wednesday, 4 July 2018 2:21 PM >>>>> To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> >>>>> Subject: [MT-AU Public] Axiom Cyber Shield >>>>> >>>>> Hi all, >>>>> >>>>> After seeing their presentation at the Melbourne MUM, we've been >>>>> having a look at Axiom Cyber Shield. Is anyone on here using it and >>>>> happy to >>>> provide >>>>> some feedback, on-list or off-list? It certainly sounds like a good >>>> product, but I >>>>> only seem to be able to find sales pitch information, not unbiased >>>> reviews. >>>>> >>>>> Regards, >>>>> Philip Loenneker | Network Engineer | TasmaNet >>>>> 40-50 Innovation Drive, Dowsing Point, Tas 7010, Australia >>>>> P: 1300 792 711 >>>>> >>> philip.loenneker(a)tasmanet.com.au<mailto:philip.loenneker@tasmanet.co >>>>> m.au >>>>>> >>>>> www.tasmanet.com.au<http://www.tasmanet.com.au/> >>>>> >>>>> _______________________________________________ >>>>> Public mailing list >>>>> Public(a)talk.mikrotik.com.au >>>>> http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.co >>>>> m.au >>>> >>>> >>>> _______________________________________________ >>>> Public mailing list >>>> Public(a)talk.mikrotik.com.au >>>> http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. >>>> au >>>> >>> _______________________________________________ >>> Public mailing list >>> Public(a)talk.mikrotik.com.au >>> http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au >> >> >> _______________________________________________ >> Public mailing list >> Public(a)talk.mikrotik.com.au >> http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au >> > > > ------------------------------ > > Message: 2 > Date: Mon, 11 Jan 2021 09:25:58 +1100 > From: "Mike Everest" <mike(a)duxtel.com> > To: "'MikroTik Australia Public List'" <public(a)talk.mikrotik.com.au> > Subject: Re: [MT-AU Public] Axiom Cyber Shield > Message-ID: <07de01d6e79f$92231f80$b6695e80$(a)duxtel.com> > Content-Type: text/plain; charset="us-ascii" > > Hi Mal, > > You'd probably also need to add a dns based web filter for a closer match to > Fortiguard functionality. > > Cheers! > > Mike. > >> -----Original Message----- >> From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of >> Malcolm Faed >> Sent: Monday, 11 January 2021 9:15 AM >> To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> >> Subject: Re: [MT-AU Public] Axiom Cyber Shield >> >> Hi all, >> >> Thanks Mike, >> >> Yes that helps. I was asked to see if we could use a MT solution to go up >> against a FortiWiFi 30E >> >> It seems the Axiom Cyber Shield would go some way toward meeting the >> functionality of the Fortigate. >> >> Cheers, >> >> *Malcolm Faed.* >> Broadcast Network Engineer >> >> *Av-Comm* >> avcomm.com.au >> malcolm(a)avcomm.com.au >> 24/9 Powells Road, Brookvale, NSW 2100, Australia >> P: +61 (2) 9939 4377 >> M: +61 409 601 747 >> >> [image: Twitter] <https://twitter.com/AvCommSatellite> >> <https://plus.google.com/+AvcommAustralia/>[image: Youtube] >> <https://www.youtube.com/channel/UCO8ZtcnwoTH7e54LAndE-yw>[image: >> Linkedin] <https://www.linkedin.com/company-beta/6583589/> >> >> This e-mail message may contain confidential or legally privileged >> information and is intended only for the use of the intended recipient(s). >> Any unauthorised disclosure, dissemination, distribution, copying or the >> taking of any action in reliance on the information herein is prohibited. >> E-mails are not secure and cannot be guaranteed to be error free as they > can >> be intercepted, amended, or contain viruses. Anyone who communicates >> with us by e-mail is deemed to have accepted these risks. Av-Comm is not >> responsible for errors or omissions in this message and denies any >> responsibility for any damage arising from the use of e-mail. Any opinion > and >> other statement contained in this message and any attachment are solely >> those of the author and do not necessarily represent those of the company. >> >> >>> On Sat, 9 Jan 2021 at 13:56, Mike Everest <mike(a)duxtel.com> wrote: >>> >>> Hi Mal and all, >>> >>> We did run an evaluation subscription for a while, and can confirm >>> that it certainly 'works as advertised' but in the end we found that >>> the reporting data (at the time valuated) was rudimentary at best and >>> we thought it was difficult to find the value in a USD300/year > subscription >> cost per router. >>> >>> The analytics essentially came down to "we detected 'x' packets of type > 'y' >>> during the Last month". We didn't detect any noticeable change in >>> network or generic attack activity while running it, but it could >>> easily depend on the type of network node and profile of the operator... >>> >>> It's not something that I would recommend that /everyone/ needs to >>> sign up to for every router they manage, but it is definitely a >>> reasonable option for those who are actively seeking that kind of >>> service :) >>> >>> Does it help? >>> >>> Cheers, Mike. >>> >>> ---------------------------------------------------------------------- >>> ------ >>> -------- >>> Why Choose DuxTel for all your MikroTik needs? >>> 10 good reasons: http://duxtel.com/why_duxtel >>> >>> ---------------------------------------------------------------------- >>> ------ >>> -------- >>> Follow our tweets for news and updates: http://twitter.com/duxtel >>> >>> >>> >>> >>>> -----Original Message----- >>>> From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf >>>> Of Malcolm Faed >>>> Sent: Thursday, 7 January 2021 2:31 PM >>>> To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> >>>> Subject: Re: [MT-AU Public] Axiom Cyber Shield >>>> >>>> Hi Philip and Mike, >>>> >>>> Two and a half years later..... >>>> Did you end up running it? >>>> I am interested in it and wondering if it has been worthwhile. >>>> If you subscribed to the analytics, do you find it useful? >>>> >>>> Cheers, >>>> Mal >>>> >>>> *Malcolm Faed.* >>>> Broadcast Network Engineer >>>> >>>> *Av-Comm* >>>> avcomm.com.au >>>> malcolm(a)avcomm.com.au >>>> 24/9 Powells Road, Brookvale, NSW 2100, Australia >>>> P: +61 (2) 9939 4377 >>>> M: +61 409 601 747 >>>> >>>> [image: Twitter] <https://twitter.com/AvCommSatellite> >>>> <https://plus.google.com/+AvcommAustralia/>[image: Youtube] >>>> <https://www.youtube.com/channel/UCO8ZtcnwoTH7e54LAndE- >> yw>[image: >>>> Linkedin] <https://www.linkedin.com/company-beta/6583589/> >>>> >>>> This e-mail message may contain confidential or legally privileged >>>> information and is intended only for the use of the intended >>> recipient(s). >>>> Any unauthorised disclosure, dissemination, distribution, copying or >>>> the taking of any action in reliance on the information herein is >> prohibited. >>>> E-mails are not secure and cannot be guaranteed to be error free as >>>> they >>> can >>>> be intercepted, amended, or contain viruses. Anyone who communicates >>>> with us by e-mail is deemed to have accepted these risks. Av-Comm is >>>> not responsible for errors or omissions in this message and denies >>>> any responsibility for any damage arising from the use of e-mail. >>>> Any opinion >>> and >>>> other statement contained in this message and any attachment are >>>> solely those of the author and do not necessarily represent those of >>>> the >>> company. >>>> >>>> >>>> On Wed, 4 Jul 2018 at 16:15, Mike Everest <mike(a)duxtel.com> wrote: >>>> >>>>> G'day! >>>>> >>>>> We've been running it on one of our development routers for a >>>>> couple of weeks, still getting to know the system and how it all >>>>> works, but looking very good so far! :) >>>>> >>>>> (we are considering becoming their premier partner for Australia >>>>> ;) >>>>> >>>>> Cheers! >>>>> >>>>>> -----Original Message----- >>>>>> From: Public [mailto:public-bounces@talk.mikrotik.com.au] On >>>>>> Behalf Of >>>>> Philip >>>>>> Loenneker >>>>>> Sent: Wednesday, 4 July 2018 2:21 PM >>>>>> To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> >>>>>> Subject: [MT-AU Public] Axiom Cyber Shield >>>>>> >>>>>> Hi all, >>>>>> >>>>>> After seeing their presentation at the Melbourne MUM, we've been >>>>>> having a look at Axiom Cyber Shield. Is anyone on here using it >>>>>> and happy to >>>>> provide >>>>>> some feedback, on-list or off-list? It certainly sounds like a >>>>>> good >>>>> product, but I >>>>>> only seem to be able to find sales pitch information, not >>>>>> unbiased >>>>> reviews. >>>>>> >>>>>> Regards, >>>>>> Philip Loenneker | Network Engineer | TasmaNet >>>>>> 40-50 Innovation Drive, Dowsing Point, Tas 7010, Australia >>>>>> P: 1300 792 711 >>>>>> >>>> >> philip.loenneker(a)tasmanet.com.au<mailto:philip.loenneker@tasmanet.co >>>>>> m.au >>>>>>> >>>>>> www.tasmanet.com.au<http://www.tasmanet.com.au/> >>>>>> >>>>>> _______________________________________________ >>>>>> Public mailing list >>>>>> Public(a)talk.mikrotik.com.au >>>>>> http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikroti >>>>>> k.co >>>>>> m.au >>>>> >>>>> >>>>> _______________________________________________ >>>>> Public mailing list >>>>> Public(a)talk.mikrotik.com.au >>>>> > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. >>>>> au >>>>> >>>> _______________________________________________ >>>> Public mailing list >>>> Public(a)talk.mikrotik.com.au >>>> http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.co >>>> m.au >>> >>> >>> _______________________________________________ >>> Public mailing list >>> Public(a)talk.mikrotik.com.au >>> http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. >>> au >>> >> _______________________________________________ >> Public mailing list >> Public(a)talk.mikrotik.com.au >> http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > Public mailing list > Public(a)talk.mikrotik.com.au > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > ------------------------------ > > End of Public Digest, Vol 81, Issue 3 > *************************************

1 0

Mikrotik USB LTE
by Tim Sandy 09 Jan '21

09 Jan '21

Unfortunately there aren't any Mikrotiks out there that feature both internal LTE and an SFP cage. >From a friend's recommendation, I've ordered for testing an external LTE bridge modem (NetGear LB2120) that passes the IP through to RouterOS - but this is an external device and another power supply. Does anyone have a product recommendation for a USB modem that presents an LTE interface and the LTE IP address to RouterOS? With the exception of the Chateau - which doesn't have an SFP cage - the Mikrotik LTE solutions don't support band 28. And an additional question - Does anyone know of any 5G hardware available that does the same? Thanks! Tim

4 3