November 2021 - Public - talk.mikrotik.com.au

Draytek modem firmware update
by Roger Plant 09 Apr '22

09 Apr '22

https://faq.draytek.com.au/2021/11/11/nbn-vdsl2-connection-update/ For those with vigor 130's, etc in front of the Mikrotik. Regards Roger---------------------------- Roger Plant

3 3

ether2 not enabled as bridge port
by Karl Auer 01 Dec '21

01 Dec '21

We found that ether2 on a newly installed RB4011 was "not working". Investigation revealed it was not delivering an IP address via DHCP. Further investigation revealed that unlike every other port 3-10 in the bridge, ether2 was disabled. Since the DHCP server is on the bridge interface, devices connected to ether2 are not getting served. /interface bridge port add bridge=bridge1 disabled=yes interface=ether2 add bridge=bridge1 interface=ether3 [etc] I didn't configure this unit. I'm a bit mystified as to why it would have been configured like that. My question is whether I can safely just enable it. I can't see why not, but as it is now in production I thought I would ask the brains trust... Regards, K. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Karl Auer (kauer(a)nullarbor.com.au) work +61 2 64957435 http://www.nullarbor.com.au mobile +61 428 957160 GPG fingerprint: 9FB6 C08F 91CB 5093 30EF 3E2F 8C94 EEBD 117C 4A10 Old fingerprint: CF68 0C56 EEE4 CC19 28D4 03B3 BCE0 E800 E31F 7254

5 8

PS180-T / RB4011
by Denis Hancock 30 Nov '21

30 Nov '21

Hi All Has anyone been able to get an vDSL SFP PS180 to work with Exetel on an RB4011 ? We're using VLAN8 (8/35 LLC) (we hope) so SFP has a VLAN8 hanging off it PPPoE client interface set to VLAN8 thanks for any advice -- *Denis Hancock* Chief Technical Officer / Director Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621> Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock> Australian Information Security Association (AISA) Member This email is intended only for the addressed and is subject to copyright. If you have received this email in error, please notify me immediately.

5 8

Fiber splicing and testing gear - available
by Mike Everest 25 Nov '21

25 Nov '21

Hello, As a favour to a deceased estate liquidator, if there is anyone interested to consider purchse of some fiber splicing and testing gear to please contact me off-list. Apologies to those who might consider such a post 'inappropriate' here (those folks are welcome to let me know off-list also ;) but finding a buyer will be very helpful to the young family :-} Thanks! Mike.

1 0

RB4011 and Yealink W60B
by Karl Auer 22 Nov '21

22 Nov '21

Just installed an RB4011 in a client site. They had an existing Yealink W60B phone there, powered by a plug-pack. The specs on the plug pack say 600mA output. Tried plugging the phone in to the poE port (10) on the RB4011, with no success. The W60B showed no evidence of seeing power. Tried setting poe-out on the port to "forced-on", no change. The Yealink doco says it requires "IEEE 802.3af, Class 1" PoE. I can't find any such spec for the RB4011, just lots of statements that it is passive PoE. Is there a trick or should I give up? Regards, K. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Karl Auer (kauer(a)nullarbor.com.au) work +61 2 64957435 http://www.nullarbor.com.au mobile +61 428 957160 GPG fingerprint: 9FB6 C08F 91CB 5093 30EF 3E2F 8C94 EEBD 117C 4A10 Old fingerprint: CF68 0C56 EEE4 CC19 28D4 03B3 BCE0 E800 E31F 7254

9 10