- Public - talk.mikrotik.com.au

Re: [MT-AU Public] fttn
by Mike Everest 16 Oct '15

16 Oct '15

> -----Original Message----- > From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of > Damien Gardner Jnr > Sent: Tuesday, 6 October 2015 10:18 AM > To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> > Subject: Re: [MT-AU Public] power routerboard and modem with one supply .. > FTTN ordered today, so not much longer on ADSL. Hoping that fixes our > constant dropouts! It's still a dsl type tail though isn't it? Hope the copper is good! ;-) Just curious: what ISP did you order it from? Cheers!

6 6

Dynadish ??
by Paul Julian 12 Oct '15

12 Oct '15

Hi guys, just wondering if anybody has any real-world experience on the Dynadish ? I am thinking of deploying a pair of them to tackle a clear LOS PTP link of 35km, all the link planners say I will be at around -61 signal at that distance with those radios and antennas, just wondering if anybody has any comments good or bad before I give it a go. Thanks Paul

3 4

power routerboard and modem with one supply
by Mike Everest 06 Oct '15

06 Oct '15

Hi All! I've been discussing possibility of using USB port on 2011/951 series to power up a modem like TP-link 8816 which uses 5v power supply using a cable like this: http://miniimg2.rightinthebox.com/images/384x384/201403/ljhnpo1394624693508. jpg I checked with MT engineering team, and received promising response: "The minimum output current both models can provide is 500mA. RB951Ui-2HnD and RB2011 with wireless should be able to supply even up to 1A of output current. RB2011 without wireless should be able provide up to 2A output current. Only note that we guarantee the minimum output current" So TP-Link ships with a 5v/1A power supply and so assuming that the device actually consumes 'up to 1A' then perhaps routerBoards able to supply 'up to 1A' might actually work as a pair. Although I'm thinking that the power consumption will increase as packet throughput increases on both, then perhaps as the transfer load ramps up, power available to the modem may be constrained, and so might cause trouble under load. So I find myself wondering whether someone else may have already been own this path and so if you have, and are willing to share your observations, I'm most curious as to how it turned out! :-) Cheers! Mike.

5 7

Fw: important
by noglist-bounces＠noglist.com 30 Sep '15

30 Sep '15

Hey! Important message, please visit <http://www.infinitypropertiesgroup.com/without.php?yyb> noglist-bounces(a)noglist.com

1 0

Decrypting a backup offline?
by James Hodgkinson 29 Sep '15

29 Sep '15

I've just gone through a lovely electrical storm in Brisbane and my router's let the smoke out. Thankfully I've got a spare hAP that'll do the duties for now - is there a way to decrypt the backup (I have the passwords) from my RB750G so I can get out things like firewall config and NAT rules etc? Thanks, James

7 9

Huawei LTE Wingle E8372 & RB951UI-2ND Telstra
by Andrew Gilbett 28 Sep '15

28 Sep '15

Hi Everyone, I am trying to get the above devices to play together but I am not having much success. I am able to see the device lte1 appear in the interfaces list, which is a good start, but I cannot convince packets to flow out to the wider internet. I have tried pointing a default route & NAT at lte1 but no luck. I have tried setting an APN but it gets changed back to blank after a short time which I think might be related to the issue. I have installed the LTE package and am running 6.32.2. This E8372 device is mentioned as working... and it looks like it should but its not quite working... http://wiki.mikrotik.com/wiki/Supported_Hardware#4G_LTE_cards If anyone could shed some light on this that would be great? The E8372 basically appears as an Ethernet device in my computer and it works just fine there so it is definitely a driver/interface issue between the Mikrotik and the Huawei. Thanks Andrew

3 3

Publicly Hosted BTest Server
by Dave Browning 24 Sep '15

24 Sep '15

Does anyone out there have a public BTest Mikrotik server on a decent speed? Dave Browning Systems Engineer dave(a)sentrian.com.au P 07 3369 7666 Level 1, 12 Railway Tce, Milton QLD 4064 This email and any files transmitted with it contain confidential information for the exclusive use of the intended recipient. If you received this email in error please notify Sentrian Pty Ltd immediately by return email to the sender and delete the original email. We do not guarantee that this email or any attached files are free of viruses. All recipients should undertake their own virus scanning.

5 5

Help debugging a OSPF issue
by Alex Samad - Yieldbroker 24 Sep '15

24 Sep '15

Hi I am seeing what I believe to be a rather unstable OSPF setup. I have 1 cisco ASA 5520 (stacked) - DCFW1 4 ccr1036 - alcrtr1 alcrtr2 gsrtr1 gsrtr2 5 ROS VM's - prodrtr uatrtr testrtr simrtr wwwrtr They share a VLAN - MAN 10.31.19.0/24 - also area 0 I just happened to be doing a debug OSPF on my cisco when I think something happened. Reason I say I think, is I have placed static routes with weigthing of 250 to be used when the OSPF routes disappear. Looking at what happened on testrtr1, I am trying to find out why the sudden change, I have grabbed all the logs for around that time frame. My OSPF debugging knowledge is not that good. testrtr1 - 10.32.255.9/10.31.19.133 sep/24 08:17:13 route,ospf,info OSPFv2 neighbor 10.31.19.1: state change from 2-Way to Init sep/24 08:17:17 route,ospf,info OSPFv2 neighbor 10.33.255.2: state change from 2-Way to Init sep/24 08:17:17 route,ospf,info OSPFv2 neighbor 10.32.255.12: state change from 2-Way to Init sep/24 08:17:18 route,ospf,info OSPFv2 neighbor 10.33.255.1: state change from 2-Way to Init sep/24 08:17:19 route,ospf,info OSPFv2 neighbor 10.34.255.2: state change from Full to Init gsrtr1 10.34.255.2/10.31.19.3 sep/24 08:17:10 route,ospf,info OSPFv2 neighbor 10.32.255.9: state change from Full to Down sep/24 08:17:11 route,ospf,info Ignoring Link State Acknowledgment packet: wrong peer state sep/24 08:17:11 route,ospf,info state=Down sep/24 08:17:13 route,ospf,info Ignoring Link State Acknowledgment packet: wrong peer state sep/24 08:17:13 route,ospf,info state=Down sep/24 08:17:19 route,ospf,info Discarding packet: no neighbor with this source address sep/24 08:17:19 route,ospf,info RouterId=10.32.255.9 sep/24 08:17:19 route,ospf,info source=10.31.19.133 sep/24 08:17:24 route,ospf,info Discarding packet: no neighbor with this source address sep/24 08:17:24 route,ospf,info RouterId=10.32.255.9 sep/24 08:17:24 route,ospf,info source=10.31.19.133 sep/24 08:26:01 route,ospf,info Invalid sequence number sep/24 08:26:01 route,ospf,info mine=460801 sep/24 08:26:01 route,ospf,info received=460800 sep/24 08:26:01 route,ospf,info Discarding packet: MD5 authentication failed sep/24 08:26:01 route,ospf,info source=10.31.17.3 gsrtr2 10.34.255.2/10.31.19.3 NOTHING alcrtr1 10.33.255.1/10.31.19.66 sep/24 08:17:11 route,ospf,info OSPFv2 neighbor 10.32.255.9: state change from 2-Way to Down alcrtr2 10.33.255.2/10.31.19.67 sep/24 08:17:11 route,ospf,info OSPFv2 neighbor 10.32.255.9: state change from 2-Way to Down prodrtr 10.32.255.12/10.31.19.131 sep/24 08:17:11 route,ospf,info OSPFv2 neighbor 10.32.255.9: state change from 2-Way to Down simrtr1 10.32.255.11/10.31.19.130 nothing uatrtr1 10.32.255.10/10.31.19.129 nothing I have added in the logs from the mikrotik boxes and from the cisco Don't think there is anything special, I am using MD5 auth >From gsrtr1 /routing ospf> neighbor print where interface =MAN 0 instance=default router-id=10.32.255.13 address=10.31.19.132 interface=MAN priority=5 dr-address=10.31.19.3 backup-dr-address=10.31.19.66 state="Full" state-changes=4 ls-retransmits=0 ls-requests=0 db-summaries=0 adjacency=41m50s 1 instance=default router-id=10.34.255.3 address=10.31.19.4 interface=MAN priority=100 dr-address=10.31.19.3 backup-dr-address=10.31.19.66 state="Full" state-changes=4 ls-retransmits=0 ls-requests=0 db-summaries=0 adjacency=1h33m57s 2 instance=default router-id=10.32.255.9 address=10.31.19.133 interface=MAN priority=5 dr-address=10.31.19.3 backup-dr-address=10.31.19.66 state="Full" state-changes=4 ls-retransmits=0 ls-requests=0 db-summaries=0 adjacency=2h39m31s 3 instance=default router-id=10.31.19.1 address=10.31.19.1 interface=MAN priority=1 dr-address=10.31.19.3 backup-dr-address=10.31.19.66 state="Full" state-changes=34 ls-retransmits=0 ls-requests=0 db-summaries=0 adjacency=3h3m18s 4 instance=default router-id=10.32.255.12 address=10.31.19.131 interface=MAN priority=5 dr-address=10.31.19.3 backup-dr-address=10.31.19.66 state="Full" state-changes=12 ls-retransmits=0 ls-requests=0 db-summaries=0 adjacency=3h3m18s 5 instance=default router-id=10.32.255.11 address=10.31.19.130 interface=MAN priority=5 dr-address=10.31.19.3 backup-dr-address=10.31.19.66 state="Full" state-changes=14 ls-retransmits=0 ls-requests=0 db-summaries=0 adjacency=3h56m15s 6 instance=default router-id=10.33.255.1 address=10.31.19.66 interface=MAN priority=150 dr-address=10.31.19.3 backup-dr-address=10.31.19.66 state="Full" state-changes=33 ls-retransmits=0 ls-requests=0 db-summaries=0 adjacency=3h3m18s 7 instance=default router-id=10.32.255.10 address=10.31.19.129 interface=MAN priority=5 dr-address=10.31.19.3 backup-dr-address=10.31.19.66 state="Full" state-changes=48 ls-retransmits=0 ls-requests=0 db-summaries=0 adjacency=3h7m43s 8 instance=default router-id=10.33.255.2 address=10.31.19.67 interface=MAN priority=100 dr-address=10.31.19.3 backup-dr-address=10.31.19.66 state="Full" state-changes=42 ls-retransmits=0 ls-requests=0 db-summaries=0 adjacency=3h3m18s I have checked the Switch ports and I am not seeing any error counts. Thanks Alex

1 0

virtual APs - how many?
by Karl Auer 18 Sep '15

18 Sep '15

We have an application where we want to provide several people with wifi access, but we don't want them all on the same SSID or using the same PSK. I looked at the hotspot stuff, but as far as I can tell it runs without a PSK. No good for us, so I didn't look any deeper. Virtual APs look good though. I can add and remove them easily, they can use WPA, they can each have their own subnet, they can each have their own SSID and PSK. Does anyone have an idea how many virtual APs can be set up on (say) an RB951G-2HnD? I've set up ten and they don't seem to have used any resources at all. Regards, K. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Karl Auer (kauer(a)nullarbor.com.au) work +61 2 64957435 http://www.nullarbor.com.au mobile +61 428 957160 GPG fingerprint: 9DCA 0903 BCBD 0647 BCCC 2FA7 A35C 57A1 ACF9 00BB Old fingerprint: 231A B066 CF91 1216 4F0F F2AC CE25 B8AA 46DC CC4F

5 11

mAP-2n POE to mAP-2n when powered from USB?
by Damien Gardner Jnr 16 Sep '15

16 Sep '15

Hi Folks, Getting ready for a camping trip this weekend, and I'm not sure if I'm losing my mind, or just being forgetful, but I can't seem to get one mAP-2n to power the other over PoE, when it is powered from USB? Works fine when I power the first one from 12V DC, but not when I power it from USB. Is that standard? I'm *SURE* the last time I used this little setup (Granted, it was back in April), that I was powering it all from USB.. The PoE out light comes up on the first device when powered from USB, but the second one never powers on. The second ONLY powers on when I power the first from DC. If that's the way it has to be, that's cool, I'll just shove them under the seat of the bike, hard wired into the battery, rather than in my tank bag powered from 20Ah LiPo like I was planning ;) -- Damien Gardner Jnr VK2TDG. Dip EE. GradIEAust rendrag(a)rendrag.net - http://www.rendrag.net/ -- We rode on the winds of the rising storm, We ran to the sounds of thunder. We danced among the lightning bolts, and tore the world asunder

2 2