- Public - talk.mikrotik.com.au

L3 over QinQ and a Bridge -- too far?
by Terry Sweetser 09 Sep '15

09 Sep '15

Hello Mikrotikians, I've been looking at this one for a while now. I have several hundred QinQ vlans heading into a single bridge group. ipv4 and ipv6 from the bridge interface into the individual links is working well. None of the ipv4 addresses can actually connect to or ping each other. Flags: X - disabled, R - running 0 R name="bridge136" mtu=auto actual-mtu=1500 l2mtu=1992 *arp=proxy-arp* mac-address=D4:CA:6D:01:38:C7 protocol-mode=none priority=0x8000 auto-mac=yes admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s transmit-hold-count=6 ageing-time=5m Flags: X - disabled, I - inactive, D - dynamic 0 interface=XXXXXX bridge=bridge136 priority=0x80 path-cost=10 edge=auto *point-to-point=yes* external-fdb=auto horizon=1 auto-isolate=no A bridge too far? _So, I'm looking for solution where the IPv* arrives at bridge136 and then goes straight back out the correct port.__ _ -- http://about.me/terry.sweetser

4 11

fan direction in the CCR's
by Alex Samad - Yieldbroker 08 Sep '15

08 Sep '15

Hi Is there any option to buy an front to back airflow CCR's ? Or is there an option in the config to change the direction of the fans ? A

3 10

X86
by Terry Sweetser (SkyMesh) 08 Sep '15

08 Sep '15

Hi Mikrotikians, For those of you running ROS on X86 server hardware -- what's your recommend bare metal server set up? -- http://about.me/terry.sweetser

1 0

Warranty on CCR's
by Alex Samad - Yieldbroker 07 Sep '15

07 Sep '15

Hi I think I have a dead CCR1036, well I have power cycled a few times and it is non responsive, haven't placed a console on it yet. I was going to replace with a new one. But I got to thinking, a) what's the warranty on these, I had presumed 12 months, pretty sure mine is older than 12 months, checked out the web site and couldn't find any details b) how would one go about fixing one of these, is it worth it for the cost, maybe the new ccr1072's maybe? A

3 4

3G/4G on mAP2n or hAP-2nD
by Paul Julian 01 Sep '15

01 Sep '15

Hi guys, just wondering if anybody has used the Routerboard mAP2n with a USB dongle for 3G/4G access ? We are looking at some out of band options for some remote sites and also a way to identify if there has been a power problem on site, so thinking that these things are pretty cheap and we can configure them as an out of band router which plugs into the mains power rather than UPS, that way if we see it drop we know we are running on UPS and if our other gear fails for any reason we can get in remotely using the unit as long as the mains power is working. The other option I am considering is the hAP-2nD which has the advantage of additional ports which I can connect to different devices on site if need be. Both units are the same price. Any thoughts ?? Regards Paul

6 6

BGP Revisited?
by Terry Sweetser (SkyMesh) 27 Aug '15

27 Aug '15

http://routerboard.com/CCR1072-1G-8Splus -- it's out -- will it do a full BGP table? -- http://about.me/terry.sweetser

1 0

vmxnet3 in ROS now
by Alex Samad - Yieldbroker 25 Aug '15

25 Aug '15

Hi Not that new release http://forum.mikrotik.com/viewtopic.php?f=21&t=99531 but the key think I wanted to point out was *) chr - added x86_64 image for use in virtual environments *) chr - added support for VMware SCSI virtual disks *) chr - added support for VMware vmxnet3 network card *) chr - added support for HyperV SCSI disks *) chr - added support for HyperV Ethernet interfaces *) chr - added support for virtio disks Awesome ..... vmxnet3 drivers woo hoo, didn't think they would do this. A

8 23

BGP TABLES
by Terry Sweetser (SkyMesh) 21 Aug '15

21 Aug '15

Hi Mikrotikians, Any one recently tried BGP with a full table on a CCR 36 core with 1+ Gbps of traffic? How did go? Or not go? -- http://about.me/terry.sweetser

6 12

Sierra Wireless MC7304 info channel
by Andrew Thrift 17 Aug '15

17 Aug '15

Good afternoon, I was wondering if anyone has managed to get the Info channel working on these at the same time as the data channel. We only seem to be able to get one or the other, not both working. Regards, Andrew

1 0

Upgrade from 5.24 to 6.31 possible ???
by Paul Julian 16 Aug '15

16 Aug '15

Hi guys, just wondering if somebody can confirm if I can upgrade from 5.24 straight to 6.31 on an RB1100 ?? I thought you needed to go to a later version of 5.x first before upgrading ? When I try to do the upgrade from within the router itself it says that the latest version is 6.27 and then complains that it can't find one of the npk files and aborts the download. Thanks Paul

5 7