- Public - talk.mikrotik.com.au

MikroTik User Meeting
by Mike Everest 20 May '15

20 May '15

Hi folks, Only three more sleeps until the MUM event in Melbourne! I have a few full registration entry vouchers left over - if you'd like one, YELL NOW! :-D Regards, Mike Everest www.duxtel.com.au 138 Station Street, Norlane Victoria, 3214, AUSTRALIA 1300-DUXTEL (+61-3-5273-4905) ____________________________________________________________________________ ___ Wholesale Distributor for MikroTik and RouterBoard in Australia and Pacific Region ISP and WISP Solutions - Hardware, Software, Training, Engineering and Support All things MikroTik - http://shop.duxtel.com.au ____________________________________________________________________________ ___ Follow our tweets for news and updates: http://twitter.com/duxtel

3 4

Re: [MT-AU Public] 3G/4G with static public IP
by Jeremy Hall 13 May '15

13 May '15

Paul, I cannot recommend highly enough the services of someone like m2mone (m2mone.com.au) as a reseller/supplier of telstra wholesale m2m SIMs and products. Ordering a SIM with telstra.extranet APN access, or even a static IP, is then a simple matter of making a quick call/sending a quick email asking for a SIM to be sent out. Plus, you get access to Jasper, which is Telstra's SIM fleet management portal. Feel free to contact me off-list (and no, I don't work for m2mone - just a happy customer). Cheers > From: Paul Julian <paul(a)oxygennetworks.com.au> > To: "public(a)talk.mikrotik.com.au" <public(a)talk.mikrotik.com.au> > Date: 13 May 2015 12:29:15 pm AWST > Subject: [MT-AU Public] 3G/4G with static public IP > > > Hi guys, is anybody currently using a 3G/4G mobile sim in a router/device that has a static public IP ? > > I can't find anybody in Telstra who actually realises that they sell such a plan so can't get any traction on it even though I know that people definitely have them and use them. > > Can anybody tell me how to order such a service ? > > Thanks > Paul >

2 1

3G/4G with static public IP
by Paul Julian 13 May '15

13 May '15

Hi guys, is anybody currently using a 3G/4G mobile sim in a router/device that has a static public IP ? I can't find anybody in Telstra who actually realises that they sell such a plan so can't get any traction on it even though I know that people definitely have them and use them. Can anybody tell me how to order such a service ? Thanks Paul

4 7

support.rif viewer
by Matt Perkins 11 May '15

11 May '15

Is it just me or is the support.rif viewer on the mikrotik web site broken. I have tried 4 browsers and 2 computers No luck in uploading any .rif files and no errror messages. Matt -- /* Matt Perkins Direct 1300 137 379 Spectrum Networks Ptd. Ltd. Office 1300 133 299 matt(a)spectrum.com.au Level 6, 350 George Street Sydney 2000 Spectrum Networks is a member of the Communications Alliance & TIO */

2 4

Leapsecond and ROS
by Alex Samad - Yieldbroker 11 May '15

11 May '15

Hi Any one done any testing to see if there is going to be an issue ? I have asked here http://forum.mikrotik.com/report.php?f=3&p=480809&pm=0 but no response A Alex Samad | Network And System Manager | Yieldbroker * +61 2 9994 2893 | ( +61 438 838 143 | * alex.samad(a)yieldbroker.com<mailto:alex.samad@yieldbroker.com> This email is confidential and intended for the addressee only. If you may have received this email in error please delete it and notify the sender immediately. Recipients should not forward, disclose, distribute or copy this e-mail or any attachments in whole or part without the express permission of the sender. Views expressed in this message are those of the individual sender, except where they are specifically stated to be those of Yieldbroker. Yieldbroker accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. Yieldbroker can not guarantee the integrity of this communication and shall not be liable for e-mail which may be intercepted, corrupted, lost, spoofed, delayed, incomplete, or virus infected.

1 0

Tell us about your MikroTik project/s
by Mike Everest 10 May '15

10 May '15

Hi Everyone - we still need a couple more presentation topics for the MUM on Friday :-) I know that everybody on this list has some great projects and interesting networks that would be enormous interest to the MUM audience! Some topic ideas: a case study about your network - how you use mikrotik prouct and what benefits and limitations it has. some problem you came up against. How you figured out what the problem was, and what you did to fix it some interesting or clever trick you have developed to make configuration management better/easier some scripting technique that you have developed or learned. Even procedures or techniques that you have learned via video tutorial or online post make great presentations! All presenters get free entry to the MUM, 4 routerOS L5 licenses, plus invitation to DuxTel 'Party Boat' event after the MUM! Join all the MikroTik representatives, exhibitors and other presenters on a 2 hour cruise of the yarra river with catering (incl drinks) included! :-) Reply on or off list if interested! See you on Friday!(?) Cheers, Mike.

1 0

BFD + CCR1036
by Alex Samad - Yieldbroker 24 Apr '15

24 Apr '15

Hi I have a few CCR1036-8G-2S+, (6.22) I tried turning on BFD with OSPF. My first hurdle was BFD doesn't work by itself ! I then associated it with a OSPF interface, which had 4 nodes on it. Turned it on all 4 nodes.. worked for a while then up / down flapping ... I ran some tests sending flood pings down the line, no missed packets ! My final test, 2 of these boxes side by side, 1 cross over cable. Turned on OSPF + BFD, started to fail :( I have a nice simple firewall rule 10 ;;; Allow BFD chain=input action=accept protocol=udp dst-port=3784 log=no log-prefix="" I do have a drop invalid before it, but that should affect it and for a period of time BFD does come up. I have it attached to one of my BGP peers on a ROS VM, it seems to work fine. So I'm leaning toward an issue with CCR's So anyone else using BFD with CCR's and OSPF ? Alex

4 14

Out of Band access options
by Paul Julian 21 Apr '15

21 Apr '15

Hi All, I am interested to know what people are using for OOB management access to remote sites. We have a mix of routers from TPLink to Mikrotik with 3G/4G or DSL lines into them which we then jump through to get to gear on a site, we are currently reviewing our options with a view to standardising on one brand/model if possible. Mikrotik Routerboard is a good option, but for DSL connections it needs a modem, and if using 3G/4G the modems for PCIe are a bit pricey still, just wondering what others are doing and what the most cost effective approach would be for such a little utilised component but one that is really important for remote sites. Regards Paul

5 5

Re: [MT-AU Public] Public Digest, Vol 14, Issue 11
by David Ryan 20 Apr '15

20 Apr '15

Thanks for the info Jason. I'll see what becomes of tomorrow's trip. Regards Dave. On 20/04/2015 12:00 PM, <public-request(a)talk.mikrotik.com.au> wrote: > Send Public mailing list submissions to > public(a)talk.mikrotik.com.au > > To subscribe or unsubscribe via the World Wide Web, visit > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > or, via email, send a message with subject or body 'help' to > public-request(a)talk.mikrotik.com.au > > You can reach the person managing the list at > public-owner(a)talk.mikrotik.com.au > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Public digest..." > > > Today's Topics: > > 1. Re: Public Digest, Vol 14, Issue 10 (David Ryan) > 2. Re: Public Digest, Vol 14, Issue 10 > (Jason Hecker (Up & Running Tech)) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 19 Apr 2015 12:42:51 +1000 > From: David Ryan <dsryan(a)rjs.com.au> > To: public(a)talk.mikrotik.com.au > Subject: Re: [MT-AU Public] Public Digest, Vol 14, Issue 10 > Message-ID: > <CANNabw+J0V= > gUOkKkWdD-eCwAV-UYcN2GfVA0HDFU0GNouLn7w(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Hi Jason, > > thanks for the reply. > > Out of interest, what gear did you end up using? Single radio units or > dual? > > Would you care to share routeros version, open or WPA security and any > other good stuff? > > I have it working around my house with no problems as we speak as I am > setting it up for another job. I will get to the other site next week and > try and tweak. > > Regards, Dave. > > On 19 April 2015 at 12:00, <public-request(a)talk.mikrotik.com.au> wrote: > > > Send Public mailing list submissions to > > public(a)talk.mikrotik.com.au > > > > To subscribe or unsubscribe via the World Wide Web, visit > > > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > or, via email, send a message with subject or body 'help' to > > public-request(a)talk.mikrotik.com.au > > > > You can reach the person managing the list at > > public-owner(a)talk.mikrotik.com.au > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of Public digest..." > > > > > > Today's Topics: > > > > 1. HWMP+ and WDS fun and games (David Ryan) > > 2. Re: HWMP+ and WDS fun and games (Jason Hecker (Up & Running Tech)) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sat, 18 Apr 2015 15:11:59 +1000 > > From: David Ryan <dsryan(a)rjs.com.au> > > To: public(a)talk.mikrotik.com.au > > Subject: [MT-AU Public] HWMP+ and WDS fun and games > > Message-ID: > > <CANNabwJZ-5PpcWxoDkM2dLDiwv=MxUUYgjNYMR+H= > > yJTGadQKw(a)mail.gmail.com> > > Content-Type: text/plain; charset=UTF-8 > > > > Hi all, > > > > I recently setup an HWMP+ mesh using 4 x RB951Ui at home to be used in > the > > field. > > > > The home setup appeared to work fine but of course was an ideal setup. > > > > The units are now in the field and seemed to be working fine at the time > of > > installation. I logged in remotely today to find the three wds-slave > units > > are disconnecting with > > > > 14:23:48 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, wants > > WDS > > 14:23:57 wireless,info 4C:5E:0C:D2:70:2D@wlan1: disconnected, received > > deauth: reserved (0) > > 14:24:00 wireless,debug wlan1: 4C:5E:0C:D2:70:2D attempts to associate > > 14:24:00 wireless,info 4C:5E:0C:D2:70:2D@wlan1: connected, is AP, wants > > WDS > > 14:24:13 wireless,info 4C:5E:0C:D5:1B:07@wlan1: disconnected, received > > deauth: reserved (0) > > 14:24:16 wireless,info 4C:5E:0C:D5:1B:07@wlan1: connected, is AP, wants > > WDS > > 14:24:53 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: disconnected, > > management-protection failure > > 14:24:57 wireless,debug wlan1: 4C:5E:0C:A2:3E:C3 attempts to associate > > 14:24:57 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, wants > > WDS > > > > type errors. > > > > All units are 6.27, wireless-fp package. Signal levels vary of course, > but > > between them is typically around -70dB. They will stay up for about 1 > > minute then drop as shown above. > > > > management-protection was left as default (allowed), security is set as > > WPA2-PSK, aes-ccm. > > > > The design of the building prevents getting cable to the units easily, > > hence the mesh idea. > > > > Has anyone come across this or have any ideas on how to solve? > > > > Regards, Dave. > > > > -- > > David Ryan - 0402 054 426 > > RJS Communications > > dsryan(a)rjs.com.au > > MTCNA, MTCWE, MTCRE > > > > > > ------------------------------ > > > > Message: 2 > > Date: Sun, 19 Apr 2015 09:29:32 +1000 > > From: "Jason Hecker (Up & Running Tech)" > > <jason(a)upandrunningtech.com.au> > > To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> > > Subject: Re: [MT-AU Public] HWMP+ and WDS fun and games > > Message-ID: > > <CAATJ+fts_yY8UqVM24W_=T1jKQ_UxVaV=w1EaJp= > > triEgR8utQ(a)mail.gmail.com> > > Content-Type: text/plain; charset=UTF-8 > > > > I set up a mesh with 3 units for similar reasons (cabling not possible) > for > > a client last year. I looked into HWMP+ vs Dynamic WDS and went with the > > latter just by itself. It's worked like a charm for 8+ months and the > > hotel owner still tells me how great it is! > > > > > > On 18 April 2015 at 15:11, David Ryan <dsryan(a)rjs.com.au> wrote: > > > > > Hi all, > > > > > > I recently setup an HWMP+ mesh using 4 x RB951Ui at home to be used in > > the > > > field. > > > > > > The home setup appeared to work fine but of course was an ideal setup. > > > > > > The units are now in the field and seemed to be working fine at the > time > > of > > > installation. I logged in remotely today to find the three wds-slave > > units > > > are disconnecting with > > > > > > 14:23:48 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, > wants > > > WDS > > > 14:23:57 wireless,info 4C:5E:0C:D2:70:2D@wlan1: disconnected, received > > > deauth: reserved (0) > > > 14:24:00 wireless,debug wlan1: 4C:5E:0C:D2:70:2D attempts to associate > > > 14:24:00 wireless,info 4C:5E:0C:D2:70:2D@wlan1: connected, is AP, > wants > > > WDS > > > 14:24:13 wireless,info 4C:5E:0C:D5:1B:07@wlan1: disconnected, received > > > deauth: reserved (0) > > > 14:24:16 wireless,info 4C:5E:0C:D5:1B:07@wlan1: connected, is AP, > wants > > > WDS > > > 14:24:53 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: disconnected, > > > management-protection failure > > > 14:24:57 wireless,debug wlan1: 4C:5E:0C:A2:3E:C3 attempts to associate > > > 14:24:57 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, > wants > > > WDS > > > > > > type errors. > > > > > > All units are 6.27, wireless-fp package. Signal levels vary of course, > > but > > > between them is typically around -70dB. They will stay up for about 1 > > > minute then drop as shown above. > > > > > > management-protection was left as default (allowed), security is set as > > > WPA2-PSK, aes-ccm. > > > > > > The design of the building prevents getting cable to the units easily, > > > hence the mesh idea. > > > > > > Has anyone come across this or have any ideas on how to solve? > > > > > > Regards, Dave. > > > > > > -- > > > David Ryan - 0402 054 426 > > > RJS Communications > > > dsryan(a)rjs.com.au > > > MTCNA, MTCWE, MTCRE > > > _______________________________________________ > > > Public mailing list > > > Public(a)talk.mikrotik.com.au > > > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > > > > > > > -- > > > > > > ------------------------------ > > > > Subject: Digest Footer > > > > _______________________________________________ > > Public mailing list > > Public(a)talk.mikrotik.com.au > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > > ------------------------------ > > > > End of Public Digest, Vol 14, Issue 10 > > ************************************** > > > > > > -- > David Ryan - 0402 054 426 > RJS Communications > dsryan(a)rjs.com.au > MTCNA, MTCWE, MTCRE > > > ------------------------------ > > Message: 2 > Date: Sun, 19 Apr 2015 14:15:39 +1000 > From: "Jason Hecker (Up & Running Tech)" > <jason(a)upandrunningtech.com.au> > To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> > Subject: Re: [MT-AU Public] Public Digest, Vol 14, Issue 10 > Message-ID: > <CAATJ+fvtEhXEhD_HNThX3iEFzxrn=q_MdVyg= > fsfnsb9us_jyQ(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Hi > > It was an RB2011UiAS-2HnD-IN and two RB951Ui-2HnD. Firmware was maybe > 6.20, I can't recall. > > The lines of interest for you are as applied to the RB2011: > > /interface bridge > add l2mtu=1598 name=bridge1 > /interface wireless > set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode > \ > antenna-gain=2 band=2ghz-b/g/n channel-width=20/40mhz-ht-below > country=\ > australia disabled=no distance=indoors frequency=2462 > hw-protection-mode=\ > rts-cts l2mtu=2290 mode=ap-bridge radio-name=RouterA ssid=Mikrotik \ > tx-power=30 tx-power-mode=all-rates-fixed wds-default-bridge=bridge1 \ > wds-mode=dynamic-mesh wmm-support=enabled > /interface wireless security-profiles > set [ find default=yes ] authentication-types=wpa2-psk eap-methods="" > mode=\ > dynamic-keys supplicant-identity=MikroTik > wpa2-pre-shared-key=<yourpassword> > /interface bridge port > add bridge=bridge1 interface=ether1 > add bridge=bridge1 interface=ether6 > add bridge=bridge1 interface=wlan1 > > On 19 April 2015 at 12:42, David Ryan <dsryan(a)rjs.com.au> wrote: > > > Hi Jason, > > > > thanks for the reply. > > > > Out of interest, what gear did you end up using? Single radio units or > > dual? > > > > Would you care to share routeros version, open or WPA security and any > > other good stuff? > > > > I have it working around my house with no problems as we speak as I am > > setting it up for another job. I will get to the other site next week and > > try and tweak. > > > > Regards, Dave. > > > > On 19 April 2015 at 12:00, <public-request(a)talk.mikrotik.com.au> wrote: > > > > > Send Public mailing list submissions to > > > public(a)talk.mikrotik.com.au > > > > > > To subscribe or unsubscribe via the World Wide Web, visit > > > > > > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > > or, via email, send a message with subject or body 'help' to > > > public-request(a)talk.mikrotik.com.au > > > > > > You can reach the person managing the list at > > > public-owner(a)talk.mikrotik.com.au > > > > > > When replying, please edit your Subject line so it is more specific > > > than "Re: Contents of Public digest..." > > > > > > > > > Today's Topics: > > > > > > 1. HWMP+ and WDS fun and games (David Ryan) > > > 2. Re: HWMP+ and WDS fun and games (Jason Hecker (Up & Running > Tech)) > > > > > > > > > ---------------------------------------------------------------------- > > > > > > Message: 1 > > > Date: Sat, 18 Apr 2015 15:11:59 +1000 > > > From: David Ryan <dsryan(a)rjs.com.au> > > > To: public(a)talk.mikrotik.com.au > > > Subject: [MT-AU Public] HWMP+ and WDS fun and games > > > Message-ID: > > > <CANNabwJZ-5PpcWxoDkM2dLDiwv=MxUUYgjNYMR+H= > > > yJTGadQKw(a)mail.gmail.com> > > > Content-Type: text/plain; charset=UTF-8 > > > > > > Hi all, > > > > > > I recently setup an HWMP+ mesh using 4 x RB951Ui at home to be used in > > the > > > field. > > > > > > The home setup appeared to work fine but of course was an ideal setup. > > > > > > The units are now in the field and seemed to be working fine at the > time > > of > > > installation. I logged in remotely today to find the three wds-slave > > units > > > are disconnecting with > > > > > > 14:23:48 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, > wants > > > WDS > > > 14:23:57 wireless,info 4C:5E:0C:D2:70:2D@wlan1: disconnected, received > > > deauth: reserved (0) > > > 14:24:00 wireless,debug wlan1: 4C:5E:0C:D2:70:2D attempts to associate > > > 14:24:00 wireless,info 4C:5E:0C:D2:70:2D@wlan1: connected, is AP, > wants > > > WDS > > > 14:24:13 wireless,info 4C:5E:0C:D5:1B:07@wlan1: disconnected, received > > > deauth: reserved (0) > > > 14:24:16 wireless,info 4C:5E:0C:D5:1B:07@wlan1: connected, is AP, > wants > > > WDS > > > 14:24:53 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: disconnected, > > > management-protection failure > > > 14:24:57 wireless,debug wlan1: 4C:5E:0C:A2:3E:C3 attempts to associate > > > 14:24:57 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, > wants > > > WDS > > > > > > type errors. > > > > > > All units are 6.27, wireless-fp package. Signal levels vary of course, > > but > > > between them is typically around -70dB. They will stay up for about 1 > > > minute then drop as shown above. > > > > > > management-protection was left as default (allowed), security is set as > > > WPA2-PSK, aes-ccm. > > > > > > The design of the building prevents getting cable to the units easily, > > > hence the mesh idea. > > > > > > Has anyone come across this or have any ideas on how to solve? > > > > > > Regards, Dave. > > > > > > -- > > > David Ryan - 0402 054 426 > > > RJS Communications > > > dsryan(a)rjs.com.au > > > MTCNA, MTCWE, MTCRE > > > > > > > > > ------------------------------ > > > > > > Message: 2 > > > Date: Sun, 19 Apr 2015 09:29:32 +1000 > > > From: "Jason Hecker (Up & Running Tech)" > > > <jason(a)upandrunningtech.com.au> > > > To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> > > > Subject: Re: [MT-AU Public] HWMP+ and WDS fun and games > > > Message-ID: > > > <CAATJ+fts_yY8UqVM24W_=T1jKQ_UxVaV=w1EaJp= > > > triEgR8utQ(a)mail.gmail.com> > > > Content-Type: text/plain; charset=UTF-8 > > > > > > I set up a mesh with 3 units for similar reasons (cabling not possible) > > for > > > a client last year. I looked into HWMP+ vs Dynamic WDS and went with > the > > > latter just by itself. It's worked like a charm for 8+ months and the > > > hotel owner still tells me how great it is! > > > > > > > > > On 18 April 2015 at 15:11, David Ryan <dsryan(a)rjs.com.au> wrote: > > > > > > > Hi all, > > > > > > > > I recently setup an HWMP+ mesh using 4 x RB951Ui at home to be used > in > > > the > > > > field. > > > > > > > > The home setup appeared to work fine but of course was an ideal > setup. > > > > > > > > The units are now in the field and seemed to be working fine at the > > time > > > of > > > > installation. I logged in remotely today to find the three wds-slave > > > units > > > > are disconnecting with > > > > > > > > 14:23:48 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, > > wants > > > > WDS > > > > 14:23:57 wireless,info 4C:5E:0C:D2:70:2D@wlan1: disconnected, > received > > > > deauth: reserved (0) > > > > 14:24:00 wireless,debug wlan1: 4C:5E:0C:D2:70:2D attempts to > associate > > > > 14:24:00 wireless,info 4C:5E:0C:D2:70:2D@wlan1: connected, is AP, > > wants > > > > WDS > > > > 14:24:13 wireless,info 4C:5E:0C:D5:1B:07@wlan1: disconnected, > received > > > > deauth: reserved (0) > > > > 14:24:16 wireless,info 4C:5E:0C:D5:1B:07@wlan1: connected, is AP, > > wants > > > > WDS > > > > 14:24:53 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: disconnected, > > > > management-protection failure > > > > 14:24:57 wireless,debug wlan1: 4C:5E:0C:A2:3E:C3 attempts to > associate > > > > 14:24:57 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, > > wants > > > > WDS > > > > > > > > type errors. > > > > > > > > All units are 6.27, wireless-fp package. Signal levels vary of > course, > > > but > > > > between them is typically around -70dB. They will stay up for about 1 > > > > minute then drop as shown above. > > > > > > > > management-protection was left as default (allowed), security is set > as > > > > WPA2-PSK, aes-ccm. > > > > > > > > The design of the building prevents getting cable to the units > easily, > > > > hence the mesh idea. > > > > > > > > Has anyone come across this or have any ideas on how to solve? > > > > > > > > Regards, Dave. > > > > > > > > -- > > > > David Ryan - 0402 054 426 > > > > RJS Communications > > > > dsryan(a)rjs.com.au > > > > MTCNA, MTCWE, MTCRE > > > > _______________________________________________ > > > > Public mailing list > > > > Public(a)talk.mikrotik.com.au > > > > > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > > > > > > > > > > > > -- > > > > > > > > > ------------------------------ > > > > > > Subject: Digest Footer > > > > > > _______________________________________________ > > > Public mailing list > > > Public(a)talk.mikrotik.com.au > > > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > > > > > ------------------------------ > > > > > > End of Public Digest, Vol 14, Issue 10 > > > ************************************** > > > > > > > > > > > -- > > David Ryan - 0402 054 426 > > RJS Communications > > dsryan(a)rjs.com.au > > MTCNA, MTCWE, MTCRE > > _______________________________________________ > > Public mailing list > > Public(a)talk.mikrotik.com.au > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > > -- > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > Public mailing list > Public(a)talk.mikrotik.com.au > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > ------------------------------ > > End of Public Digest, Vol 14, Issue 11 > ************************************** >

2 1

Re: [MT-AU Public] Public Digest, Vol 14, Issue 10
by David Ryan 19 Apr '15

19 Apr '15

Hi Jason, thanks for the reply. Out of interest, what gear did you end up using? Single radio units or dual? Would you care to share routeros version, open or WPA security and any other good stuff? I have it working around my house with no problems as we speak as I am setting it up for another job. I will get to the other site next week and try and tweak. Regards, Dave. On 19 April 2015 at 12:00, <public-request(a)talk.mikrotik.com.au> wrote: > Send Public mailing list submissions to > public(a)talk.mikrotik.com.au > > To subscribe or unsubscribe via the World Wide Web, visit > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > or, via email, send a message with subject or body 'help' to > public-request(a)talk.mikrotik.com.au > > You can reach the person managing the list at > public-owner(a)talk.mikrotik.com.au > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Public digest..." > > > Today's Topics: > > 1. HWMP+ and WDS fun and games (David Ryan) > 2. Re: HWMP+ and WDS fun and games (Jason Hecker (Up & Running Tech)) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 18 Apr 2015 15:11:59 +1000 > From: David Ryan <dsryan(a)rjs.com.au> > To: public(a)talk.mikrotik.com.au > Subject: [MT-AU Public] HWMP+ and WDS fun and games > Message-ID: > <CANNabwJZ-5PpcWxoDkM2dLDiwv=MxUUYgjNYMR+H= > yJTGadQKw(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Hi all, > > I recently setup an HWMP+ mesh using 4 x RB951Ui at home to be used in the > field. > > The home setup appeared to work fine but of course was an ideal setup. > > The units are now in the field and seemed to be working fine at the time of > installation. I logged in remotely today to find the three wds-slave units > are disconnecting with > > 14:23:48 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, wants > WDS > 14:23:57 wireless,info 4C:5E:0C:D2:70:2D@wlan1: disconnected, received > deauth: reserved (0) > 14:24:00 wireless,debug wlan1: 4C:5E:0C:D2:70:2D attempts to associate > 14:24:00 wireless,info 4C:5E:0C:D2:70:2D@wlan1: connected, is AP, wants > WDS > 14:24:13 wireless,info 4C:5E:0C:D5:1B:07@wlan1: disconnected, received > deauth: reserved (0) > 14:24:16 wireless,info 4C:5E:0C:D5:1B:07@wlan1: connected, is AP, wants > WDS > 14:24:53 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: disconnected, > management-protection failure > 14:24:57 wireless,debug wlan1: 4C:5E:0C:A2:3E:C3 attempts to associate > 14:24:57 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, wants > WDS > > type errors. > > All units are 6.27, wireless-fp package. Signal levels vary of course, but > between them is typically around -70dB. They will stay up for about 1 > minute then drop as shown above. > > management-protection was left as default (allowed), security is set as > WPA2-PSK, aes-ccm. > > The design of the building prevents getting cable to the units easily, > hence the mesh idea. > > Has anyone come across this or have any ideas on how to solve? > > Regards, Dave. > > -- > David Ryan - 0402 054 426 > RJS Communications > dsryan(a)rjs.com.au > MTCNA, MTCWE, MTCRE > > > ------------------------------ > > Message: 2 > Date: Sun, 19 Apr 2015 09:29:32 +1000 > From: "Jason Hecker (Up & Running Tech)" > <jason(a)upandrunningtech.com.au> > To: MikroTik Australia Public List <public(a)talk.mikrotik.com.au> > Subject: Re: [MT-AU Public] HWMP+ and WDS fun and games > Message-ID: > <CAATJ+fts_yY8UqVM24W_=T1jKQ_UxVaV=w1EaJp= > triEgR8utQ(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > I set up a mesh with 3 units for similar reasons (cabling not possible) for > a client last year. I looked into HWMP+ vs Dynamic WDS and went with the > latter just by itself. It's worked like a charm for 8+ months and the > hotel owner still tells me how great it is! > > > On 18 April 2015 at 15:11, David Ryan <dsryan(a)rjs.com.au> wrote: > > > Hi all, > > > > I recently setup an HWMP+ mesh using 4 x RB951Ui at home to be used in > the > > field. > > > > The home setup appeared to work fine but of course was an ideal setup. > > > > The units are now in the field and seemed to be working fine at the time > of > > installation. I logged in remotely today to find the three wds-slave > units > > are disconnecting with > > > > 14:23:48 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, wants > > WDS > > 14:23:57 wireless,info 4C:5E:0C:D2:70:2D@wlan1: disconnected, received > > deauth: reserved (0) > > 14:24:00 wireless,debug wlan1: 4C:5E:0C:D2:70:2D attempts to associate > > 14:24:00 wireless,info 4C:5E:0C:D2:70:2D@wlan1: connected, is AP, wants > > WDS > > 14:24:13 wireless,info 4C:5E:0C:D5:1B:07@wlan1: disconnected, received > > deauth: reserved (0) > > 14:24:16 wireless,info 4C:5E:0C:D5:1B:07@wlan1: connected, is AP, wants > > WDS > > 14:24:53 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: disconnected, > > management-protection failure > > 14:24:57 wireless,debug wlan1: 4C:5E:0C:A2:3E:C3 attempts to associate > > 14:24:57 wireless,info 4C:5E:0C:A2:3E:C3@wlan1: connected, is AP, wants > > WDS > > > > type errors. > > > > All units are 6.27, wireless-fp package. Signal levels vary of course, > but > > between them is typically around -70dB. They will stay up for about 1 > > minute then drop as shown above. > > > > management-protection was left as default (allowed), security is set as > > WPA2-PSK, aes-ccm. > > > > The design of the building prevents getting cable to the units easily, > > hence the mesh idea. > > > > Has anyone come across this or have any ideas on how to solve? > > > > Regards, Dave. > > > > -- > > David Ryan - 0402 054 426 > > RJS Communications > > dsryan(a)rjs.com.au > > MTCNA, MTCWE, MTCRE > > _______________________________________________ > > Public mailing list > > Public(a)talk.mikrotik.com.au > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > > > > -- > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > Public mailing list > Public(a)talk.mikrotik.com.au > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au > > > ------------------------------ > > End of Public Digest, Vol 14, Issue 10 > ************************************** > -- David Ryan - 0402 054 426 RJS Communications dsryan(a)rjs.com.au MTCNA, MTCWE, MTCRE

2 1