-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Russell Hurren Sent: Friday, 29 September 2017 11:37 AM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] Can't connect through Winbox/Dude
Thanks Ben
In this case, the router is sitting between 0% and 1% load. It's accessible via webfig (although I normally have a port forward to the OpenVPN server behind it) and the only address lists are the whitelists for my network.
Regards
Russell
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Ben Farmer Sent: Friday, 29 September 2017 5:42 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] Can't connect through Winbox/Dude
Hi Russell,
I can't say I've ever seen a similar problem, except for when the router itself is sitting at 100% CPU usage.
Can you access the device via the web? Could there potentially be a firewall rule that's adding you to a block list? I know dynamic firewall entries are cleared out on reboot.
Regards, Ben
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Russell Hurren Sent: Thursday, 28 September 2017 19:42 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] Can't connect through Winbox/Dude
I have an intermittent problem where some routers stop allowing Winbox or Dude connections. At the moment I have a CCR1009 at a client site that's working perfectly and I can ssh into it, but I can't use Winbox or the Dude. If I reboot it, it'll come good (but I'll have to do that late at night). I've had some x86 routers do the same thing.
I can't see anything obvious in the logs or active connections. The
Thanks Mike When I run torch on the pppoe interface with my router as the src-address, port 8291, I see the following briefly when I try to connect from Winbox, but then it doesn't show anything else after half a second. MAC-PROTOCOL SRC-ADDRESS SRC-PORT DST-PORT TX RX TX-PACKETS RX-PACKETS ip 10.180.32.34 63506 8291 (winbox) 1696bps 2.1kbps 5 5 Regards Russell -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Mike Everest Sent: Friday, 29 September 2017 18:43 To: 'MikroTik Australia Public List' <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] Can't connect through Winbox/Dude If you can access it by ssh or webfig, try running torch tool on the internet side interface while trying to hit it by winbox - maybe packets are not even arriving there? Cheers, Mike. problem
occurs with multiple different ROS versions.
Does anyone have any suggestions for troubleshooting this?
Thanks
Russell
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au