Thanks all for the advice. For fun we did try connecting with 10M Ethernet FD, and it actually worked, but still the FTTN NBN connection dropped. The switches SFP ports are earthed to the chassis. Has anyone had any experience with Multicast video over wireless? It is not preferred over wired, but if it works without corruption it could be an option. Cheers, *Malcolm Faed.* Broadcast Network Engineer *Av-Comm* avcomm.com.au malcolm@avcomm.com.au 24/9 Powells Road, Brookvale, NSW 2100, Australia P: +61 (2) 9939 4377 M: +61 409 601 747 [image: Twitter] <https://twitter.com/AvCommSatellite> <https://plus.google.com/+AvcommAustralia/>[image: Youtube] <https://www.youtube.com/channel/UCO8ZtcnwoTH7e54LAndE-yw>[image: Linkedin] <https://www.linkedin.com/company-beta/6583589/> This e-mail message may contain confidential or legally privileged information and is intended only for the use of the intended recipient(s). Any unauthorised disclosure, dissemination, distribution, copying or the taking of any action in reliance on the information herein is prohibited. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, or contain viruses. Anyone who communicates with us by e-mail is deemed to have accepted these risks. Av-Comm is not responsible for errors or omissions in this message and denies any responsibility for any damage arising from the use of e-mail. Any opinion and other statement contained in this message and any attachment are solely those of the author and do not necessarily represent those of the company. On Wed, 26 Aug 2020 at 14:36, Jason Hecker <jason@upandrunningtech.com.au> wrote:
I have these doing 500Mbit across 500m no worries.
https://shop.duxtel.com.au/product_info.php?cPath=30_45&products_id=505
Regards, Jason Hecker <https://www.upandrunningtech.com.au/> <https://www.upandrunningtech.com.au/>
On Wed, 26 Aug 2020, at 14:11, Malcolm Faed wrote:
Thanks all for the suggestions. What a wealth of knowledge!
I confirm the SFP port is earthed via the switch to the mains.
Might see if 10M half duplex ethernet works. :) I won't hold my breath. It is probably about 250m via the MDF.
It is LOS across a few stretches of tin roof so maybe we can do wireless. Does anyone recommend any products in particular? I am obviously more familiar with MT, but can look at others.
Regards,
*Malcolm Faed.* Broadcast Network Engineer
*Av-Comm* avcomm.com.au malcolm@avcomm.com.au 24/9 Powells Road, Brookvale, NSW 2100, Australia P: +61 (2) 9939 4377 M: +61 409 601 747
[image: Twitter] <https://twitter.com/AvCommSatellite> <https://plus.google.com/+AvcommAustralia/>[image: Youtube] <https://www.youtube.com/channel/UCO8ZtcnwoTH7e54LAndE-yw>[image: Linkedin] <https://www.linkedin.com/company-beta/6583589/>
This e-mail message may contain confidential or legally privileged information and is intended only for the use of the intended recipient(s). Any unauthorised disclosure, dissemination, distribution, copying or the taking of any action in reliance on the information herein is prohibited. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, or contain viruses. Anyone who communicates with us by e-mail is deemed to have accepted these risks. Av-Comm is not responsible for errors or omissions in this message and denies any responsibility for any damage arising from the use of e-mail. Any opinion and other statement contained in this message and any attachment are solely those of the author and do not necessarily represent those of the company.
On Wed, 26 Aug 2020 at 13:32, Damien Gardner Jnr <rendrag@rendrag.net> wrote:
Ohhhh, thankyou!! :D
On Wed, 26 Aug 2020 at 13:25, <alen@duxtel.com> wrote:
Hi Damien,
That said tool and guide is available here;
https://www.dropbox.com/sh/tn7xnuxesa34q2w/AACb84aNjye9we4jBPPoQkzta?dl=0
I hope that helps!
Regards,
Alen
-----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of
Gardner Jnr Sent: Wednesday, 26 August 2020 1:01 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] PS180C-R VDSL SFP in multi-pair cable with other services
Oooh, do you have said tool??
I've read about folks getting a copy of it initially, but noone has mentioned being able to source a copy for at least two years.. I would LOVE to get a hold of it and see what raw packets they're sending to the SFP to try and build a little linux utility to interface to MRTG :)
On Wed, 26 Aug 2020 at 12:28, Russell Hurren < russell@zeropointnetworks.com> wrote:
Proscend have a tool you can use to view the signal strength etc if you contact them. They might even have newer firmware you can try. I can't remember if it lets you make any changes, but I used it to determine that the Draytek Vigor 130 was about 10% faster on a 100/40 NBN connection so I didn't keep using the Proscend CPE's.
Kind regards
Russell Hurren
-----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Jason Hecker Sent: Wednesday, 26 August 2020 10:17 To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] PS180C-R VDSL SFP in multi-pair cable with other services
The trouble is there is no way to monitor or change any settings on the Proscend modules. They are really plug and pray.
Regards, Jason Hecker <https://www.upandrunningtech.com.au/> <https://www.upandrunningtech.com.au/>
Hi,
You are possibly attempting to send very loud signals on the bands that the other modem right nearby is listening for
Perhaps Make sure the CPE end of the PS180C-R is the end near the existing modem. Make sure the PS180C-R is using profile 17a.
If the distance between the 2 PS180C-R modules is very short, perhaps
On Wed, 26 Aug 2020, at 12:13, Roger Plant wrote: put in an attenuator at the CO end.
Regards Roger
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.
au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.
au
--
Damien Gardner Jnr VK2TDG. Dip EE. GradIEAust rendrag@rendrag.net - http://www.rendrag.net/ -- We rode on the winds of the rising storm, We ran to the sounds of
Damien thunder.
We danced among the lightning bolts, and tore the world asunder _______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
--
Damien Gardner Jnr VK2TDG. Dip EE. GradIEAust rendrag@rendrag.net - http://www.rendrag.net/ -- We rode on the winds of the rising storm, We ran to the sounds of thunder. We danced among the lightning bolts, and tore the world asunder _______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au