Dumb question guys, but is it POSSIBLE to netinstall a ccr1009? I have a network cable plugged into eth8, and the other end into my macbook. I have ethernet port bridged to a windows VM running netinstall. I remove power from the CCR, hold in the reset button, and power on the CCR, and then let go the reset button, and it proceeds to boot normally :( Any ideas? :) On 4 March 2015 at 11:21, Alex Samad - Yieldbroker < Alex.Samad@yieldbroker.com> wrote:
Just stating the obvious, if it is a flash issue, running for ??? weeks before hand and then multiple reboots. Not sure I would trust it if I got it back up anyway.
The VM option sounds good.
A
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Stavros Patiniotis Sent: Wednesday, 4 March 2015 10:49 AM To: 'MikroTik Australia Public List' Subject: Re: [MT-AU Public] CCR1009 crashing - how to debug?
My CCR1009 rebooted 6 times overnight. I thought maybe it was a problem with 6.25, so upgraded to 6.27. That was > a bad idea, as it took a remote hands power cycle to get back into it. I then did a downgrade (which took it all the way
Try upgrading the firmware - had success with this before.
system routerboard upgrade
Stavros
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- Damien Gardner Jnr VK2TDG. Dip EE. GradIEAust rendrag@rendrag.net - http://www.rendrag.net/ -- We rode on the winds of the rising storm, We ran to the sounds of thunder. We danced among the lightning bolts, and tore the world asunder