Hi Damien, That said tool and guide is available here; https://www.dropbox.com/sh/tn7xnuxesa34q2w/AACb84aNjye9we4jBPPoQkzta?dl=0 I hope that helps! Regards, Alen -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Damien Gardner Jnr Sent: Wednesday, 26 August 2020 1:01 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] PS180C-R VDSL SFP in multi-pair cable with other services Oooh, do you have said tool?? I've read about folks getting a copy of it initially, but noone has mentioned being able to source a copy for at least two years.. I would LOVE to get a hold of it and see what raw packets they're sending to the SFP to try and build a little linux utility to interface to MRTG :) On Wed, 26 Aug 2020 at 12:28, Russell Hurren <russell@zeropointnetworks.com> wrote:
Proscend have a tool you can use to view the signal strength etc if you contact them. They might even have newer firmware you can try. I can't remember if it lets you make any changes, but I used it to determine that the Draytek Vigor 130 was about 10% faster on a 100/40 NBN connection so I didn't keep using the Proscend CPE's.
Kind regards
Russell Hurren
-----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Jason Hecker Sent: Wednesday, 26 August 2020 10:17 To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] PS180C-R VDSL SFP in multi-pair cable with other services
The trouble is there is no way to monitor or change any settings on the Proscend modules. They are really plug and pray.
Regards, Jason Hecker <https://www.upandrunningtech.com.au/> <https://www.upandrunningtech.com.au/>
Hi,
You are possibly attempting to send very loud signals on the bands that the other modem right nearby is listening for
Perhaps Make sure the CPE end of the PS180C-R is the end near the existing modem. Make sure the PS180C-R is using profile 17a.
If the distance between the 2 PS180C-R modules is very short, perhaps
On Wed, 26 Aug 2020, at 12:13, Roger Plant wrote: put in an attenuator at the CO end.
Regards Roger
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
-- Damien Gardner Jnr VK2TDG. Dip EE. GradIEAust rendrag@rendrag.net - http://www.rendrag.net/ -- We rode on the winds of the rising storm, We ran to the sounds of thunder. We danced among the lightning bolts, and tore the world asunder _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au