I'm personally waiting for 802.3ad or LACP support in hardware on the CRS - any signs of that appearing yet in the latest RC of v6.13? Cheers, Andrew. -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Andrew Cox Sent: Wednesday, 7 May 2014 10:33 AM To: MikroTik Australia Public List Subject: [MT-AU Public] CRS default trunked vlan script Hey All, I've been playing around with v6.13rc1-12 over the last week on a CRS125-24G-1S and have put together a an example script for provisioning the CRSwitches with a user and admin vlan that is trunked back via the SFP port. Hopefully this is useful to some of us; I know I've been waiting for a long time to have a usable and readable switch chip config on the CRS platform :-) In the config: vlan20 is the user facing vlan (untagged on ether1-24, tagged on sfp1) vlan90 is the admin vlan (tagged on sfp1) vlan90 is attached to the router cpu 10.0.0.2/24 is assigned to vlan90 10.0.0.1 is set as the default gateway Cheers, Andrew Cox _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au Important Notice: The contents of this email are intended solely for the named addressee and are confidential; any unauthorised use, reproduction or storage of the contents is expressly prohibited. If you have received this email in error, please delete it and any attachments immediately and advise the sender by return email or telephone. Deakin University does not warrant that this email and any attachments are error or virus free.