*solved my problem..* *I am using MD5 auth and by default ROS uses index 1 on the pa indexing can start at 0... so mis match of auth so no ospf so no bfd..* *A* On 9 May 2017 at 12:03, Mike Everest <mike@duxtel.com> wrote:
Hi Alex,
Did you try debug logging on MT for BFD?
/system loggin add topics=debug,bfd action=memory
Cheers, Mike.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad Sent: Tuesday, 9 May 2017 11:52 AM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] BFD /OSPF with PA-3060
Hi
trying to setup OSPF with BFD between ccr1036 and PA-3060.
the CCR can see the OSPF init, but fails because of BFD.
I have 2 PA's and they can see each other !
when i check /routing bfd neighbor> print detail
I see no rx for the PA's to the CCR.
Alex _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au