I'll try plugging it in and then powering on in the morning but I was able to plug it into a hAP, mAP and a CCR1009 and it was recognised immediately with out reboot. All running 6.33 or 6.33.1. From: Damien Gardner Jnr Sent: Wednesday, 25 November 2015 11:10 PM To: MikroTik Australia Public List Hmm, the MF823 'just works' on the CRS109 for me. When you say 'plug it in', you're power cycling the CRS after plugging it in yeah? While you can power cycle the USB port to reset a locked up LTE dongle, the dongle must be plugged in when the CRS boots, for it to see it in the first place.. On 25 November 2015 at 22:34, Andrew Gilbett <andrew@gilbett.net> wrote:
Hi Guys,
I have a Huawei E8372 that works on a hAP just fine.
But when I plug it into a CRS109-8G-1S-2HnD-IN it does not register as an LTE device even though both devices are running the same firmware. Nor does it work as a PPP device on either mikrotik.
Has any one had luck getting the USB port to work on the CRS?
Any help would be very happily received!
Thanks Andrew _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- Damien Gardner Jnr VK2TDG. Dip EE. GradIEAust rendrag@rendrag.net - http://www.rendrag.net/ -- We rode on the winds of the rising storm, We ran to the sounds of thunder. We danced among the lightning bolts, and tore the world asunder _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au