-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Paul Julian Sent: Friday, 30 May 2014 9:48 AM To: public@talk.mikrotik.com.au Subject: [MT-AU Public] CRS VLANS
Hi guys, has anybody managed to get vlans via the switch chip working in a new CCS ?
I am trying to do the simplest thing but it just doesn't seem to work. Running ROS6.13
I am trying to bring some VLAN's into the SFP port one as a trunk and
Hi Paul, Can you show us some shell config snips to see what you've done? I have to admit that I have not done a lot of work with the new switches (other than plain flat LAN setups ;) but maybe can try to reproduce what you are seeing. Cheers! trunk
them back out ether2, should be a simple task, in Cisco I create the vlan set the two ports as trunk ports and add the vlans onto the ports as members, easy, but in the CCS I can't get it to work.
I have read heaps of doco and looked at examples and everything I seem to be doing is correct but it just won't work.
When I torch the interfaces I can see the vlan traffic, but on the devices on the other side or at least the one side I can see it's not working.
The CCS worked fine with the SFP port configured using the traditional ROS vlan configuration but I can't get it to work with the switch chip.
Any suggestions or experience here ?
Regards Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au