Set the update-source to be an ip address rather than an interface? -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad - Yieldbroker Sent: Tuesday, 7 February 2017 1:56 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] just posted this to the forums - bgp issue ? Hi Interface Internet ip address on interface 10.10.10.67/24 20.20.20.67/24 bgp peer remote address 10.10.10.68, update-source=Internet whilst doing a tcp dump on 10.10.10.68, I could see BGP packets coming from 10.10.10.67 and from 20.20.20.67 it seemed to alternate and it stopped the BGP peer connecting. the auto route create is 10.10.10.0/24 Internet prf-src 10.10.10.67 so why is the bgp peer sending from 20.20.20.67 http://forum.mikrotik.com/viewtopic.php?f=14&t=117929 A Alex Samad | Network And System Manager | Yieldbroker * +61 2 9994 2893 | ( +61 438 838 143 | * alex.samad@yieldbroker.com<mailto:alex.samad@yieldbroker.com> This email is confidential and intended for the addressee only. If you may have received this email in error please delete it and notify the sender immediately. Recipients should not forward, disclose, distribute or copy this e-mail or any attachments in whole or part without the express permission of the sender. Views expressed in this message are those of the individual sender, except where they are specifically stated to be those of Yieldbroker. Yieldbroker accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. Yieldbroker can not guarantee the integrity of this communication and shall not be liable for e-mail which may be intercepted, corrupted, lost, spoofed, delayed, incomplete, or virus infected. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au