So the evidence seems to be that it has the same mounts but a shorter cable on the 1036 and some modifications to the grounding setup. But it works in the 1036 incase any one else gets stuck in a little jam. On Thu, Dec 17, 2020 at 7:22 PM Andrew Gilbett <andrew@gilbett.net> wrote:
Hi Brains Trust,
I have a CCR 1036-12G-4S whose psu has gone on the fritz. From What I can tell it is a 24V 4A Supply.
I have a CCR1016-12S-1S+ It appears that there is a minor revision between the part numbers, as per Duxtel's website.
WT2400400R3 -CCR1016 WT2400400-R6 -CCR1036
Does anyone know what the differences are and whether I can swap it out with the 1016 psu as a temp solution....
I got the 1036 going again so its back in service so looking under the hood is a little risky atm and I have a few minutes to peacefully come up with another solution :-)
Any thoughts would be appreciated.
Regards Andrew