Just to add to that, I watch the bfd neighbours and it lasts till about 70seconds then fails.. I have 4 ccr's on that segment
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad - Yieldbroker Sent: Wednesday, 25 February 2015 9:58 AM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] BFD + CCR1036
/routing bfd interface> print Flags: X - disabled, I - invalid, * - default # INTERFACE INTERVAL MIN-RX MULTIPLIER 0 * all 0.2s 0.2s 5
Then I just turn on BFD for ospf.
Alex
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Tim Warnock Sent: Wednesday, 25 February 2015 9:51 AM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] BFD + CCR1036
Hi Alex,
Can you supply configs? I've got a RB2011 and a CCR1036 doing broadcast BFD with seemingly no issue.
[admin@MikroTik] /routing bfd neighbor> print detail Flags: U - up 0 U interface=ether1 address=192.168.22.1 protocols=ospf multihop=no state=up state-changes=2 uptime=10m42s desired-tx-interval=0.2s actual-tx-interval=0.2s required-min-rx=0.2s remote-min-rx=0.2s multiplier=5 hold-time=1s packets-rx=3989 packets-tx=4006
-Tim
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad - Yieldbroker Sent: Thursday, 19 February 2015 6:00 AM To: 'MikroTik Australia Public List' Subject: Re: [MT-AU Public] BFD + CCR1036
Hi
Just an update seems like I spoke to soon, completed my upgrades of my other boxes and tried to put 4 nodes together ... failed around the 60- 70second mark :(
Alex
-----Original Message----- From: Alex Samad - Yieldbroker Sent: Saturday, 7 February 2015 7:44 AM To: MikroTik Australia Public List Subject: RE: [MT-AU Public] BFD + CCR1036
Update
So I have upgraded to 6.26 and firmware upgrade to 3.22
and now it seems to be stable !!! I have a OSPF BFD link up for 5min... way longer than what I was able to get before
Alex
-----Original Message----- From: Alex Samad - Yieldbroker Sent: Saturday, 7 February 2015 6:12 AM To: MikroTik Australia Public List Subject: RE: [MT-AU Public] BFD + CCR1036
Good I suppose, not me atleast!
I have a thread here on the forum http://forum.mikrotik.com/viewtopic.php?p=467611#p467611
if you can add you input
A
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Andrew Gilbett Sent: Friday, 6 February 2015 5:49 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] BFD + CCR1036
Hi Alex,
I did a test with a CCR 1009 v6.24 and a CCR1016 v6.26 linked with an SFP direct attached cable and setup ospf with BFD on the link and found that it dropped regularly every 90-150sec or so. Just a lab setup with no firewalls.
Normally I do not have any issues with OSPF without BFD.
Andrew
On Fri, Feb 6, 2015 at 12:46 PM, Alex Samad - Yieldbroker < Alex.Samad@yieldbroker.com> wrote:
> Hi > > I have a few CCR1036-8G-2S+, (6.22) I tried turning on BFD with OSPF. > My first hurdle was BFD doesn't work by itself ! > I then associated it with a OSPF interface, which had 4 nodes on it. > Turned it on all 4 nodes.. worked for a while then up / down > flapping ... > I ran some tests sending flood pings down the line, no > missed packets ! > > My final test, 2 of these boxes side by side, 1 cross over cable. > Turned on OSPF + BFD, started to fail :( > > I have a nice simple firewall rule > 10 ;;; Allow BFD > chain=input action=accept protocol=udp dst-port=3784 > log=no log-prefix="" > > I do have a drop invalid before it, but that should affect > it and for a period of time BFD does come up. > > I have it attached to one of my BGP peers on a ROS VM, it > seems to work fine. So I'm leaning toward an issue with > CCR's > > So anyone else using BFD with CCR's and OSPF ? > > Alex > > > _______________________________________________ > Public mailing list > Public@talk.mikrotik.com.au > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. > au > _______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.
au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au