I have a hAP Lite (RB941-2nD-TC). I went to upload an NPK file and found that I couldn't. scp fails with various errors, mostly "temporarily unavailable", and only about three-quarters of the file is copied. This is with a direct connection to a laptop. The same cable works fine with other MikroTiks, the problem happens with other cables, the problem happens on ports 2,3 and 4, and the problem persists after a configuration reset. The problem is completely repeatable. The connection is not a complete failure - I can for example log in to the device over a cable and configure it. It's a cheap device, so I don't want to spend too much time on it, but if this is a known issue with a quick fix it'd be nice :-) Regards, K. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Karl Auer (kauer@nullarbor.com.au) work +61 2 64957435 http://www.nullarbor.com.au mobile +61 428 957160 GPG fingerprint: 9FB6 C08F 91CB 5093 30EF 3E2F 8C94 EEBD 117C 4A10 Old fingerprint: CF68 0C56 EEE4 CC19 28D4 03B3 BCE0 E800 E31F 7254