:) if only that simple They have done show ip bgp <ip> advertised routes The metric column I believe shows the MED value and they definitely have it set to. Interestingly they set med on all their prefixs - they set it to 1 and I have 1 set to all of my prefixs received. Its just missing the ones with 3. So I see the prefix, but it only has a med of three They have asked me for a dump of the prefixs that are received by bgp. I only really no to look at the advertised (that's not helpful) or the /ip route print where dst-gateway =<ip address of their router> Is there some command / place I can see the prefixes received ? Alex -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Mike Everest Sent: Thursday, 26 May 2016 12:18 PM To: 'MikroTik Australia Public List' <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] bgp peering with cisco Maybe they are not /really/ sending MED - only /think/ they are ;-) Like if they forgot to write config changes and then reboot happened? Cheers! Mike.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad - Yieldbroker Sent: Thursday, 26 May 2016 10:40 AM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] bgp peering with cisco
Yep..
Same routeros (vm ) is connected to another 3rd party with Cisco gear and med is working ....
A
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Tim Warnock Sent: Wednesday, 25 May 2016 8:54 PM To: 'MikroTik Australia Public List' <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] bgp peering with cisco
Are you and them directly connected?
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad - Yieldbroker Sent: Wednesday, 25 May 2016 6:25 PM To: public@talk.mikrotik.com.au Subject: [MT-AU Public] bgp peering with cisco
Hi
Wonder if any one has come across any issue with MED attribute not been see from a cisco router.
I have a client saying they are setting the MED attribute on a prefix and its not showing up on my end.
Alex
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au