Hi, You may want to do some debugging to see why the MLPPP is failing then (but be careful a 7301 will fall over pretty quickly with too much debugging). It's pretty standard config, just make sure you have 'ppp multilink' on your virtual template and you must use "multilink bundle-name auth". Stavros -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Paul Julian Sent: Thursday, 31 July 2014 8:46 PM To: 'MikroTik Australia Public List' Subject: Re: [MT-AU Public] PPP Multilink on Telstra ADSL2 Thanks Stavros, I appreciate your response, we too run our own LNS and really thought that it should in general "work" but I have had various responses from people saying it does and it doesn't and haven't had any luck ourselves so was hoping for some real life experience which you have provided. Did you find there were any tricks needed for the bundling setup on the LNS or was it standard stuff ? We are running a Cisco 7301 as our LNS and we have the multilink bundle-name defined. I admit that I have only been able to try it on one dslam but do have an opportunity to try again hence the question initially. Regards Paul -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Stavros Patiniotis Sent: Thursday, 31 July 2014 9:09 PM To: 'MikroTik Australia Public List' Subject: Re: [MT-AU Public] PPP Multilink on Telstra ADSL2 Hello Paul, It does / can "work". There are sometimes issues with Telstra dslam's locking ports and there are also sometimes pauses in data transfer. Different locations work at differing degrees of success, which probably comes down to whether your connections are both on the same dslam and the also the type of dslam (Telstra for example have various dslams throughout their network). Multiple logins of the same username, is also a requirement due to MikroTik implementation. Not a problem for us as we also run the back end LNS network ;) -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Paul Julian Sent: Thursday, 31 July 2014 8:10 PM To: public@talk.mikrotik.com.au Subject: [MT-AU Public] PPP Multilink on Telstra ADSL2 Just wondering if anybody has successfully implemented the Mikrotik PPP Multilink setup through Telstra DSLAM's before ? We can't seem to get it to work, nothing we do seems to make the second link come up, I'm not sure if it's a Telstra thing or a Mikrotik thing Anybody had any luck with it ? Regards Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au