Hi Matt, Are you using WDS or Mesh? Also, is the WDS dynamic, or configured static? We've had some good success using the routerOS proprietary HWMP+ mesh protocol but have definitely seen some problems similar to what (I think) you are describing. What I have seen is that the mesh devices themselves are stable and stay online without missing a ping, but devices connected to Ethernet port of those mesh APs lose connectivity at apparently random intervals. The solution we discovered after giving up on trying to diagnose and fix the underlying problem is to overlay a star topology on the underlying mesh. Essentally, we took out all of the physical Wlan and Ethernet interfaces from the mesh and leave only the wds dynamic interfaces as part of the mesh. Then putting IP address on the mesh bridges, we use those as endpoints for eoip tunnels between those mesh nodes and the mesh portal node. Then use standard bridge (with STP or RSTP) to connect the Ethernet interfaces and wlans. It's a fair bit of work to set up, but the end result is a solid and very efficient network that still exhibits all of the benefit of dynamic mesh with self learning and repairing mesh. Maybe an approach that will work for you? Cheers! Mike.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Matt Chipman Sent: Tuesday, 8 July 2014 8:29 PM To: MikroTik Australia Public List Subject: [MT-AU Public] WDS disconnects
Hi all, does anyone have any issues with WDS?
We have a single RB951G-2HnD connected via ethernet cable to a snapgear which supplies internet. Connected to the 951 are "7" RB9512n via WDS in a rectangular shape (office space) to cover all the users.
This is essentially a guest network and works well most of the time. The problem we have is each device will drop off once in a while and cause outages for the users connected to that device and it either wont reconnect within a reasonable time or will need to be rebooted.
On each router, a bridge is configured and then WDS selected on it. Each wifi signal can connect to at least 2 others so the mesh topology works but I want to get the stability up for the users.
Its not the same device that loses connectivity, its rather random.
any pointers greatly appreciated.
cheers
-Matt _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au