You wouldn't happen to be using 8.8.8.8 for the watchdog would you ? If so I note that we have been using it in some cases for recursive routing and experiencing routes being marked as down (false positives) intermittently over the past 2 weeks. On 25 August 2017 at 07:29, Paul Julian <paul@oxygennetworks.com.au> wrote:
The watchdog I am referring to is not the one that watches external addresses, it's just the built-in OS one, usually it only reboots the router if there is a software lockup or something but weirdly we have seen a sharp increase in this lately.
Regards Paul
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Matt Perkins Sent: Thursday, 24 August 2017 9:56 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Mikrotik Reboots
No we have a large range of different versions. We also have a monitoring system that would detect an upshift in reboots. Nothing out of the normal.
You mentioned watchdog we have that enabled on all we do test the address directly on the other side of the uplink as our stand config
Routers are 2011's to ccr1072
Matt
-- /* Matt Perkins Direct 1300 137 379 Spectrum Networks Ptd. Ltd. Office 1300 133 299 matt@spectrum.com.au Fax 1300 133 255 Level 6, 350 George Street Sydney 2000 SIP 1300137379@sip.spectrum.com.au Google Talk MattAPerkins@gmail.com PGP/GNUPG Public Key can be found at http://pgp.mit.edu */
On 24 Aug 2017, at 9:28 pm, Paul Julian <paul@oxygennetworks.com.au> wrote:
Hi Matt, do you keep your OS versions pretty standard or have a few different versions around ?
Regards Paul
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Matt Perkins Sent: Thursday, 24 August 2017 8:59 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Mikrotik Reboots
We have many hundreds of mikrotik devices no unexplained reboots.
Matt
-- /* Matt Perkins Direct 1300 137 379 Spectrum Networks Ptd. Ltd. Office 1300 133 299 matt@spectrum.com.au Fax 1300 133 255 Level 6, 350 George Street Sydney 2000 SIP 1300137379@sip.spectrum.com.au Google Talk MattAPerkins@gmail.com PGP/GNUPG Public Key can be found at http://pgp.mit.edu */
On 24 Aug 2017, at 8:15 pm, Paul Julian <paul@oxygennetworks.com.au> wrote:
HI all, has anybody else seen a sharp increase in MT devices just rebooting for no reason of late ?
In the past month or so we must have had about 10-15 reboots for no reason. We have seen a mix of OS versions doing it, even ones with the latest bugfix version on them. CCR's, RB1100AHx2's, Grooves, QRT's, Omnitiks, they just seem to be rebooting out of the blue, it's really strange.
We run a lot of MT gear and we are seriously seeing a couple a week just reboot for no reason and I am getting a bit concerned about it. They are all rebooting due to watchdog failure, just the default OS one.
I'm interested to see if anybody else is experiencing the same.
Regards Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- *Denis Hancock* Chief Technical Officer / Director Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621> Member AISA OWASP VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2> <https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock> This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses.