You can get GPS based stratum-1 clock (commercial types) which are not at atomic clock prices but do a very good job. I think I remember seeing a Pi based roll your own GPS Stratum-1 Matt. On 1/07/2015 3:08 pm, Mike Everest wrote:
Yes, but *it* will need to get sync from somewhere else too ;)
I think I need my own atomic clock! :-D
Cheers, Mike.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Jason Hecker (Up & Running Tech) Sent: Wednesday, 1 July 2015 2:55 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Leap Second NTP bug?
Mike,
Perhaps a Raspberry Pi would be suitable for acting as an NTP server running NTPD or OpenNTPD. Cheap and cheerful!
On 1 July 2015 at 13:31, Mike Everest <mike@duxtel.com> wrote:
Good question!
This one uses script to pick a new NTP server from pool.ntp.org every week - so I don't have a record of what it had configured when it went to sleep :-}
Although it's not exactly a mission critical router, this event is probably a good lesson that I should find some alternative method to keep track of time ;)
Cheers!
Mike.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Matt Perkins Sent: Wednesday, 1 July 2015 12:02 PM To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] Leap Second NTP bug?
Hi Mike, What version of NTP is it talking to. I have just looked at 8 CCR's all up and running but all say
At the same timeing. Nothing froze however all going strong. (so far) we are running 4.2.2 on our NTP server.
Matt
On 1/07/2015 11:57 am, Mike Everest wrote:
Hi,
It wasn't just you! ;-)
It also happened to just one (of many) of ours - CCR1009 rOS6.28
Fortunately, it was the one in our rack right downstairs - so easy to access and power cycle. Would be real bad if it happened on one of the others, since it was well and truly hung... only power cycle would recover it :( Cheers!
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Kyle J. Hunter Sent: Wednesday, 1 July 2015 11:36 AM To: public@talk.mikrotik.com.au Subject: [MT-AU Public] Leap Second NTP bug?
Hey all,
Just had a bunch of my CCRs crashing within a few minutes of each other around 10:00am, the only ones which didn’t crash were ones not running NTP.
Just curious if this has happened to anyone else today or for people not on a CCR?
Kyle. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
-- /* Matt Perkins Direct 1300 137 379 Spectrum Networks Ptd. Ltd. Office 1300 133 299 matt@spectrum.com.au Level 6, 350 George Street Sydney 2000 Spectrum Networks is a member of the Communications Alliance & TIO */
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.co m.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
-- _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- /* Matt Perkins Direct 1300 137 379 Spectrum Networks Ptd. Ltd. Office 1300 133 299 matt@spectrum.com.au Level 6, 350 George Street Sydney 2000 Spectrum Networks is a member of the Communications Alliance & TIO */