Perhaps try winbox> terminal then: /system reset-configuration no-defaults=yes and start from scratch. You can copy and paste sections of your config to make the rebuild faster if it helps. For example, prior to wiping the box: /ip firewall export will give you your complete firewall config On 22 Dec 2020, at 12:00, public-request@talk.mikrotik.com.au wrote: Send Public mailing list submissions to public@talk.mikrotik.com.au To subscribe or unsubscribe via the World Wide Web, visit http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au or, via email, send a message with subject or body 'help' to public-request@talk.mikrotik.com.au You can reach the person managing the list at public-owner@talk.mikrotik.com.au When replying, please edit your Subject line so it is more specific than "Re: Contents of Public digest..." Today's Topics: 1. Restored a RB2011 config to a RB750Gr3 and have a zombie switch left in the config. (Jim Woodward) 2. Re: Restored a RB2011 config to a RB750Gr3 and have a zombie switch left in the config. (Andrew Oakeley) ---------------------------------------------------------------------- Message: 1 Date: Tue, 22 Dec 2020 11:17:50 +1100 From: "Jim Woodward" <jim@alwaysnever.net> To: <public@talk.mikrotik.com.au> Subject: [MT-AU Public] Restored a RB2011 config to a RB750Gr3 and have a zombie switch left in the config. Message-ID: <001c01d6d7f7$e2a95350$a7fbf9f0$@alwaysnever.net> Content-Type: text/plain; charset="US-ASCII" Hi All, Long time listener, first time caller. I have a weird issue, I had a RB2011 some time ago which has two switch chips, 5 port Gigiabit and 5 Port Fast Ethernet. I restored it to a RB750Gr3 and aside from resetting MAC addresses and changing the WAN uplink port there was very little else to alter (they were both running the same RouterOS at the time) However, there is some remnants of the RB2011 that I can't seem to clear which is the Fast Ethernet switch config (switch2) it shows up as follows: [jim@aruma-RB750Gr3-gw] /interface ethernet switch> print Flags: I - invalid # NAME TYPE MIRROR-SOURCE MIRROR-TARGET SWITCH-ALL-PORTS 0 switch1 MediaTek-MT7621 none none 1 I switch2 (unknown) none none [jim@aruma-RB750Gr3-gw] /interface ethernet switch port> print Flags: I - invalid # NAME SWITCH VLAN-MODE VLAN-HEADER DEFAULT-VLAN-ID 0 E2 switch1 disabled auto 1 E3 switch1 disabled auto 2 E4 switch1 disabled auto 3 E5 switch1 disabled auto 4 I E6 switch2 5 I E7 switch2 6 I E8 switch2 7 I E9 switch2 8 I E10 switch2 9 E1 switch1 fallback 1 10 switch1-cpu switch1 disabled auto 11 I switch2-cpu switch2 [jim@aruma-RB750Gr3-gw] /interface ethernet switch port> There doesn't seem to be a way to remove this from WinBox and I cant seem to find an easy way to clear it from the command line, does anyone have any hints? Would I need to do a different kind of export and re-import? Kind Regards, Jim. ------------------------------ Message: 2 Date: Tue, 22 Dec 2020 00:53:06 +0000 From: Andrew Oakeley <andrew@oakeley.com.au> To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] Restored a RB2011 config to a RB750Gr3 and have a zombie switch left in the config. Message-ID: <162C13E6-BA05-40DB-9B17-0090DBBDADFE@oakeley.com.au> Content-Type: text/plain; charset="utf-8" Hi, Did you restore a config? OP Did you restore a backup? Restoring a backup between devices is not supported. Andy Sent from my iPhone
On 22 Dec 2020, at 08:20, Jim Woodward <jim@alwaysnever.net> wrote:
?Hi All,
Long time listener, first time caller.
I have a weird issue, I had a RB2011 some time ago which has two switch chips, 5 port Gigiabit and 5 Port Fast Ethernet. I restored it to a RB750Gr3 and aside from resetting MAC addresses and changing the WAN uplink port there was very little else to alter (they were both running the same RouterOS at the time)
However, there is some remnants of the RB2011 that I can't seem to clear which is the Fast Ethernet switch config (switch2) it shows up as follows:
[jim@aruma-RB750Gr3-gw] /interface ethernet switch> print
Flags: I - invalid
# NAME TYPE MIRROR-SOURCE MIRROR-TARGET SWITCH-ALL-PORTS
0 switch1 MediaTek-MT7621 none none
1 I switch2 (unknown) none none
[jim@aruma-RB750Gr3-gw] /interface ethernet switch port> print
Flags: I - invalid
# NAME SWITCH VLAN-MODE VLAN-HEADER DEFAULT-VLAN-ID
0 E2 switch1 disabled auto
1 E3 switch1 disabled auto
2 E4 switch1 disabled auto
3 E5 switch1 disabled auto
4 I E6 switch2
5 I E7 switch2
6 I E8 switch2
7 I E9 switch2
8 I E10 switch2
9 E1 switch1 fallback 1
10 switch1-cpu switch1 disabled auto
11 I switch2-cpu switch2
[jim@aruma-RB750Gr3-gw] /interface ethernet switch port>
There doesn't seem to be a way to remove this from WinBox and I cant seem to find an easy way to clear it from the command line, does anyone have any hints? Would I need to do a different kind of export and re-import?
Kind Regards,
Jim.
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
------------------------------ Subject: Digest Footer _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au ------------------------------ End of Public Digest, Vol 80, Issue 5 *************************************