On Sun, 2018-02-04 at 10:42 +1100, Karl Auer wrote:
On Fri, 2018-02-02 at 23:21 +1100, Karl Auer wrote:
I bought an HAP ac lite, intending to use it as a throttle between a bunch of evil leeching wifi users and a client's tender defenseless Internet router. Turns out none of the interfaces on the HPA ac lite support the set bandwidth command :-(
The ever-patient people at Duxtel sent me this information about setting bandwidth: "TX limit is supported on all Atheros switch-chip ports. RX limit is supported only on AR8327/QCA8337 switch-chip ports. If you look at the second table on the link below you will be able to see what Routerboards host these chips and what interfaces they apply to: https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features" And the hAP's use a chipset that doesn't support RX limit. Regards, K. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Karl Auer (kauer@nullarbor.com.au) work +61 2 64957435 http://www.nullarbor.com.au mobile +61 428 957160 GPG fingerprint: 8454 EE43 6215 B6DD 1B4D 9D8D 984D 7BA1 7378 A38D Old fingerprint: 58F8 09D4 97E4 D74A 0940 44BC 8D6D C28C 3BC9 B0CB