I've also tried one. It works fine on my home connection at 25/5 but it's slower at my office on 100/40. It does get a bit hot, but I've still found it to be stable. I've worked with Duxtel and Proscend to analyse the data I collected, but
+1 for the below. We've also been using the DM200's with good success. Cheers, Aiden. -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of kevin@scottsip.com.au Sent: Wednesday, 11 December 2019 3:16 PM To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] Public Digest, Vol 70, Issue 2 I have predominantly been installing the Netgear DM200 -100AUS modems, updating the firmware and placing them in Bridge mode so that a Mikrotik device can do the Authentication / ip addressing. https://www.netgear.com.au/home/products/networking/modem-routers/DM200.aspx It works well, just make sure that you set the modem to "other" as the provider and let it synchronise correctly. That means pull the configuration of the connection down to the modem or you will have issues. V 1.0.0.61 is the firmware that I have been using with TPG/iiNet/AAPT NBN installations <-- needs to be this firmware or higher else you will have internet connection issues. FTTC / FTTB (close to the node connections) Bandwidth synchronises at the modem around 107 Mb for 100 Mb NBN connections - close to 97 Mb using speedtest.net / google speed test. Regards, Kevin -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of public-request@talk.mikrotik.com.au Sent: Wednesday, 11 December 2019 12:00 PM To: public@talk.mikrotik.com.au Subject: Public Digest, Vol 70, Issue 2 Send Public mailing list submissions to public@talk.mikrotik.com.au To subscribe or unsubscribe via the World Wide Web, visit http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au or, via email, send a message with subject or body 'help' to public-request@talk.mikrotik.com.au You can reach the person managing the list at public-owner@talk.mikrotik.com.au When replying, please edit your Subject line so it is more specific than "Re: Contents of Public digest..." Today's Topics: 1. Re: RB760iGS with PS180-T VDSL SFP (Jason Hecker) ---------------------------------------------------------------------- Message: 1 Date: Tue, 10 Dec 2019 18:03:07 +1100 From: "Jason Hecker" <jason@upandrunningtech.com.au> To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] RB760iGS with PS180-T VDSL SFP Message-ID: <520c5bdf-1079-497f-b9d0-8216c3d785f5@www.fastmail.com> Content-Type: text/plain Another basic (and small) VDSL2 modem you can put in bridge mode is the Netgear DM200. They retail for around $80. Regards, Jason Hecker <https://www.upandrunningtech.com.au/> <https://www.upandrunningtech.com.au/> On Fri, 29 Nov 2019, at 16:51, Russell Hurren wrote: there wasn't anything more we could do to improve the connection speed, so I'll keep using Draytek Vigor 130s for now.
The DV130 was reaching speeds in excess of 100Mbps downstream, while the
VDSL module was only reaching 90Mbps. I can't prove that the DV130 isn't misreporting it's speed, and I haven't had a chance to do an accurate speed test (my ISP only just set up their own speed test site recently).
Only thing I had to do to make it work was to disable auto-negotiation. If
you want the tool to measure the speed, Duxtel can send it to you.
Regards
Russell Hurren
-----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Darryl Ross Sent: Friday, 29 November 2019 11:16 To: public@talk.mikrotik.com.au Subject: [MT-AU Public] RB760iGS with PS180-T VDSL SFP
Hey All,
I have a client that has 8 sites, all of them are going to be ethernet
handoff (FTTC or HFC) except for one site that is going to be FTTB (VDSL). I'm planning on dropping RB760iGS into each store.
I see on the duxtel site that the VSDL SFP module has passed compliance
testing in September, does that mean it's now been approved for use on the NBN or just that its compliant with the specs? Anyone had issues running one in the desktop MTs?
-Darryl
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
------------------------------ Subject: Digest Footer _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au ------------------------------ End of Public Digest, Vol 70, Issue 2 ************************************* _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au