According to AussieBroadband DSL Mode/Interface Type: Ethernet Wan Internet Connection Type: Dynamic or IPOE or DHCP No VLAN ID So as you have done so already isolate ether10, remove it from the bridge... use dhcp client for ether10 Set up a route to 0.0.0.0 via ether10 (IP Address allocated to the nic) Set up a masquerade rule to use ether10 as the new outbound wan port. You may also need to change or add a few DNS settings depending on the provider. Go to grc.com and use shields up in case you have inadvertently opened up your firewall and network to the outside world Block anything that you need and happy internetting. Regards, Kevin -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of public-request@talk.mikrotik.com.au Sent: Saturday, 23 November 2019 12:00 PM To: public@talk.mikrotik.com.au Subject: Public Digest, Vol 69, Issue 4 Send Public mailing list submissions to public@talk.mikrotik.com.au To subscribe or unsubscribe via the World Wide Web, visit http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au or, via email, send a message with subject or body 'help' to public-request@talk.mikrotik.com.au You can reach the person managing the list at public-owner@talk.mikrotik.com.au When replying, please edit your Subject line so it is more specific than "Re: Contents of Public digest..." Today's Topics: 1. NBN DHCP interface config example for Aussiebroadband HFC (Chris Herrmann) 2. Re: NBN DHCP interface config example for Aussiebroadband HFC (Chris Herrmann) 3. Re: NBN DHCP interface config example for Aussiebroadband HFC (Andrew Oakeley) ---------------------------------------------------------------------- Message: 1 Date: Fri, 22 Nov 2019 14:36:34 +1100 From: Chris Herrmann <chrisherrmann7@gmail.com> To: public@talk.mikrotik.com.au Subject: [MT-AU Public] NBN DHCP interface config example for Aussiebroadband HFC Message-ID: <CAE+JXUWyiz1K_GVvGxUgymEhezOS0KOWjkSUL9+7f7wdb=9cmA@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Hi guys, Aussiebroadband HFC NBN getting installed today. Does anyone have some pointers for what I'm missing... What I need to achieve is port10 acting as a DHCP client on Native VLAN. I've broken port 10 out of the bridge, and set it to native / default VLAN 11 (because I don't want it on the default VLAN 1). What I can't work out, is how to tell it to make the interface act as a DHCP client (which I'm guessing should in turn build default routes etc etc etc)? I've tried creating a VLAN interface under the physical but this doesn't have any DHCP client options either... I don't need PPPOE - I just need DHCP. Any suggestions? Thanks! Chris ------------------------------ Message: 2 Date: Fri, 22 Nov 2019 14:38:56 +1100 From: Chris Herrmann <chrisherrmann7@gmail.com> To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] NBN DHCP interface config example for Aussiebroadband HFC Message-ID: <CAE+JXUX3T7ngpU5Ag_pAs+KU06Lon8Q4AxRD42He-d+0xoGbZQ@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" d'oh /ip dhcp-client now I just need the nbn outage in my area to go away... On Fri, 22 Nov 2019 at 14:36, Chris Herrmann <chrisherrmann7@gmail.com> wrote:
Hi guys,
Aussiebroadband HFC NBN getting installed today. Does anyone have some pointers for what I'm missing...
What I need to achieve is port10 acting as a DHCP client on Native VLAN.
I've broken port 10 out of the bridge, and set it to native / default VLAN 11 (because I don't want it on the default VLAN 1).
What I can't work out, is how to tell it to make the interface act as a DHCP client (which I'm guessing should in turn build default routes etc etc etc)?
I've tried creating a VLAN interface under the physical but this doesn't have any DHCP client options either...
I don't need PPPOE - I just need DHCP. Any suggestions?
Thanks!
Chris
------------------------------ Message: 3 Date: Fri, 22 Nov 2019 03:48:46 +0000 From: Andrew Oakeley <andrew@oakeley.com.au> To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] NBN DHCP interface config example for Aussiebroadband HFC Message-ID: <MEXPR01MB0855EA427FFD1CB8C796106DF4490@MEXPR01MB0855.ausprd01.prod.outlook. com> Content-Type: text/plain; charset="us-ascii" Hi, Don't forget to add the following on that interface too - Drop All firewall rule on the input chain - masquerade rule on the outbound traffic from that interface in NAT Andrew -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Chris Herrmann Sent: Friday, 22 November 2019 11:39 AM To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] NBN DHCP interface config example for Aussiebroadband HFC d'oh /ip dhcp-client now I just need the nbn outage in my area to go away... On Fri, 22 Nov 2019 at 14:36, Chris Herrmann <chrisherrmann7@gmail.com> wrote:
Hi guys,
Aussiebroadband HFC NBN getting installed today. Does anyone have some pointers for what I'm missing...
What I need to achieve is port10 acting as a DHCP client on Native VLAN.
I've broken port 10 out of the bridge, and set it to native / default VLAN 11 (because I don't want it on the default VLAN 1).
What I can't work out, is how to tell it to make the interface act as a DHCP client (which I'm guessing should in turn build default routes etc etc etc)?
I've tried creating a VLAN interface under the physical but this doesn't have any DHCP client options either...
I don't need PPPOE - I just need DHCP. Any suggestions?
Thanks!
Chris
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au ------------------------------ Subject: Digest Footer _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au ------------------------------ End of Public Digest, Vol 69, Issue 4 *************************************