Hi Nick, I'm pretty sure you can't do lns with Cisco lac and MikroTik, I think it's to do with dynamic interfaces through an l2tp tunnel or something Regards Paul
On 8 Mar 2015, at 9:48 am, "Nick Pratley" <nick.pratley@serversaustralia.com.au> wrote:
Thanks Tim,
There is a VLAN and a /30 between myself & the provider, BGP established over that link and they send all traffic form their loopback IP over to my side of the /30.
Was only a few changes away to get to that - but it still doesn't work or I have completely missed something.
The remote-address in the secret should be what I want the DSL tail to get from the server, correct?
This is what I have so far if it helps
/ppp profile name="default-l2tp" local-address=x.x.x.27 remote-ipv6-prefix-pool=*0 use-ipv6=no use-mpls=no use-compression=no use-vj-compression=no use-encryption=no only-one=default change-tcp-mss=yes address-list="" dns-server=8.8.8.8
/ppp secret name="nick@domain.com" service=l2tp caller-id="nick@domain.com" password="hidden" profile=default-l2tp remote-address=192.168.10.100 routes="" limit-bytes-in=0 limit-bytes-out=0 last-logged-out=jan/01/1970 00:00:00
/interface l2tp-server name="l2tp-in1" user=""
/interface l2tp-server enabled: yes max-mtu: 1500 max-mru: 1500 mrru: 1600 authentication: pap,chap keepalive-timeout: 30 default-profile: default-l2tp use-ipsec: no ipsec-secret: _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au