I reckon 6.36 is still doughy in the middle and needs more time cooking. My RB2011 had to be reset last night as the internet ran very slow as did the Web interface but Winbox seemed OK. No obvious CPU use issues or problems in the log. After a reboot all was good again. The problem was the same for Wifi and ethernet connected devices. I have had RC's spontaneously reboot with kernel panics in the past but not this go-slow. Time to go back until 6.36.5 comes out. On 28 July 2016 at 15:15, Paul Julian <paul@oxygennetworks.com.au> wrote:
What's the chance of some setting not taking and not being able to get back in through wireless interface ?
That's what I'm concerned about, but from what I read you can only have one wireless package installed for the upgrade to work to the next version 6.37, I can only assume that means you can have ANY one wireless package installed, is that how you read it ? or does it have to be wireless-cm2 ?
I'm not sure what to make of this: Note, there will be only one "wireless" package in the next RouterOS v6.37. If you are not using "routeros" bundle package and have two wireless packages installed, uninstall one wireless package before upgrade to 6.37. For other cases simply upgrade to 6.37 version.
So just need to make sure you don't have two packages installed then ? So even though this is for 6.36 before upgrading to 6.37 you need to uninstall the wireless package you aren't using, assuming you have two installed, restart, then install the upgrade and it will upgrade the package you have left ?
I think this will need some bench testing before doing live upgrades through wireless.....
We have been sticking with the wireless-fp package as it seems better for NV2, any thoughts on the differences between the wireless-fp and wireless-cm2 packages in this respect ?
Regards Paul
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Aaron Were Sent: Thursday, 28 July 2016 2:50 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Latest ROS Version
Enable wireless-cm2 as you disable wireless-fp, should be good mate.
Aaron
On 28 July 2016 at 12:57, Paul Julian <paul@oxygennetworks.com.au> wrote:
Hi guys, I noticed in the change log of the latest ROS version 6.36 it talks about wireless packages and needing to uninstall wireless-fp package before installing the upgrade, apart from a lot of changes in this one !
So apart from visiting all of our sites running this package so that we can connect via Ethernet to upgrade these routers does anybody have more information as to the impact or alternate options to achieve the upgrade over the wireless link ?
*) wireless - wireless-fp is discontinued, it needs to be uninstalled/disabled before upgrade
Regards Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
--
Regards,
Aaron Were
IT Systems Administrator TDJ Australia Pty Ltd [image: TDJ Australia Pty Ltd] [image: Serving Australia & New Zealand since 1985] <http://tdj.com.au> awere@tdj.com.au Delivery: 78 Mills Road, Braeside VIC 3195 Postal: PO Box 883, Braeside VIC 3195 Phone: +61-3-8587-8888 <+61385878888> Fax: +61-3-8587-8855 The information contained in this email is confidential and privileged material and is intended only for the use of the person(s) to whom it is addressed. If you are not the intended recipient of this email, please return it to the sender at TDJ Australia and destroy any copies made. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
--