Hi All, FYI. Mikrotik CCR to Mikrotik CCR 40km Prolab's SFP+(programmed for cisco) 6db attenuator and a 1ft patch lead on both legs works. I will let you know how they go in the field in the next few weeks on a 30km run. Matt with On 6/11/2015 3:25 PM, Mike Everest wrote:
Waiting with bated breath! :-D
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Matt Perkins Sent: Friday, 6 November 2015 2:50 PM To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] >LR range SFP + mikrotik
Im going to find out for sure soon. Im about to interconnect two CCR1072's over a 25km run in the next two weeks.
I will let everyone know how i go.
Matt
On 6/11/2015 2:45 PM, Mike Everest wrote:
Hi Andrew, thanks for that follow-up,
Who told you that info? It is almost opposite of what they told me! :-D
Cheers, Mike.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Andrew Thrift Sent: Friday, 6 November 2015 12:03 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] >LR range SFP + mikrotik
Hi Guys,
Just a follow up on this.
I spoke with Mikrotik. There is no limitation on the type of SFP+ type that is used in CRS + CCR models.
The only thing to be aware of is that on the CCR1072, the SFP+ and M2 slots share the same power rail. So if you want to use all SFP+ ports you may not be able to use the M2 slots at the same time.
Regards,
Andrew
On Mon, Nov 2, 2015 at 5:19 PM, Mike Everest <mike@duxtel.com> wrote:
Thanks Andrew! :)
Cheers, Mike.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Andrew Thrift Sent: Friday, 30 October 2015 9:43 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] >LR range SFP + mikrotik
Hi Mike (and list)
I have tested SFP+ ER CWDM modules between a CCR1036 and a CCR1072 with no problems. This was on the bench via an attenuator and I had it running for a week with no major problems.
Maybe I got lucky, if Mikrotik say it is not within design spec I would believe them.
YMMV. On 30/10/2015 6:31 pm, "Mike Everest" <mike@duxtel.com> wrote:
Hi All!
I receive questions from various folks from time to time who need to take advantage of dark fibre runs > 20Km. I have already received confirmation from MT that none of their products currently support power required to deliver greater than LR modules, so I suppose that the only option is for some kind of third party switch or media converter would be required when using MikroTik routers at the endpoints? Here is a query I received this afternoon:
"What are after is integrating a 45km Single mode dark fibre into our network, obviously mikrotik routers on each end. If we could push 10Gbps that would be awesome, however if we could obtain 2 or 3Gbps with a lot less effort that would most likely be the go to start with."
Does anyone have any suggestions for the OP? (I suggested that he post here, but perhaps he's a bit too shy to post in a public forum, so I offered to ask on behalf ;)
Any comments will be most appreciated!
Cheers, Mike.
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.co m .au
Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
-- /* Matt Perkins Direct 1300 137 379 Spectrum Networks Ptd. Ltd. Office 1300 133 299 matt@spectrum.com.au Level 6, 350 George Street Sydney 2000 Spectrum Networks is a member of the Communications Alliance & TIO */
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- /* Matt Perkins Direct 1300 137 379 Spectrum Networks Ptd. Ltd. Office 1300 133 299 matt@spectrum.com.au Level 6, 350 George Street Sydney 2000 Spectrum Networks is a member of the Communications Alliance & TIO */