For remote OOBM we use the Sierra USB 308 (branded Telstra Elite) with whatever RB that's appropriate. This presents as a ppp interface just like the pcie cards and allows fun things like Telstra.extranet apn's and all the good things that come with a public ip on an interface without worry about all the nat shortfalls. This combined with the serial port proxy makes OOBM super easy for most console operations across all vendors. As they are an older model they are a little harder to find in the marketplace but you can still get them. I managed to pick up 30 units for about $10 each off ebay (like this listing: http://www.ebay.com.au/itm/Sierra-wireless-USB-308-elite-Mobile-Broadband-Telstra-NextG-USB-Modem-Dongle-/291433581392?pt=LH_DefaultDomain_15&hash=item43dacb8b50 ) have been using them for about 2 years and haven't had an issue at all. RJ -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alen Orsolic Sent: Tuesday, 21 April 2015 2:51 PM To: jason@upandrunningtech.com.au; 'MikroTik Australia Public List' Subject: Re: [MT-AU Public] Out of Band access options I'm with Jason on this one and here is some of his handy work, :-) The Telstra prepaid ZTE MF823 (~$50) does indeed work on my 751G and 2011 box using firmware 6.27. Some things to note to have it work in a straightforward mode: * The Mikrotik knows how to set up the right USB IDS's to get the ethernet USB interface going. * It also knows to tell the modem to connect to the network. * Use a DHCP client on the LTE1 interface with default route and Peer DNS set. * The DHCP client gives you an address of 192.168.0.182/24 and the modem is 192.168.0.1. * I used used SRC NAT to the 192.168.0/24 subnet. The modem runs Linux on ARM internally so you can log into it with telnet and change the default subnet on the modem apparently. Telstra have disabled or hidden these settings in the web menu on 192.168.0.1. * Be wary of the triple NAT in effect and any consequences: Internet <| 10/8 Telstra <| Modem 192.168.0/24 <| Your network * As per the Mikrotik Wiki cold power the 2011 when plugging in the modem otherwise LTE1 doesn't come up properly. This wasn't an issue on the 751G. * Disabling then reenabling the LTE1 interface brings it up briefly then it disables itself again. Only a plugging cycle fixes this. * Make sure the main router power supply can drive your router and the full 2.5W to the USB port. * This message is coming to you via the LTE1 interface on my 2011. Regards, Alen -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Jason Hecker (Up & Running Tech) Sent: Tuesday, 21 April 2015 3:45 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Out of Band access options Have a look here on the list from a few weeks ago on the success I had using a Telstra 4G USB dongle with Mikrotik. They are only about $60 for the 4G units. On 21 April 2015 at 15:26, Paul Julian <paul@oxygennetworks.com.au> wrote:
Hi All, I am interested to know what people are using for OOB management access to remote sites.
We have a mix of routers from TPLink to Mikrotik with 3G/4G or DSL lines into them which we then jump through to get to gear on a site, we are currently reviewing our options with a view to standardising on one brand/model if possible.
Mikrotik Routerboard is a good option, but for DSL connections it needs a modem, and if using 3G/4G the modems for PCIe are a bit pricey still, just wondering what others are doing and what the most cost effective approach would be for such a little utilised component but one that is really important for remote sites.
Regards Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
-- _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au