Hi Like both :) I use my ccr for the core and VM on Dell ESXi hosts for environmental router/firewall. I have worked around my 1G tcp limit where I can. And for the price ... can't really go wrong.. A -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Daniel Hoffman Sent: Wednesday, 21 October 2015 9:02 AM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] X86 I am enjoying reading this thread an I like the numbers you are seeing out of single thread sessions on the x86 units. I also have had some frustration with the CCR and single thread TCP and single core BGP however I manage that the best I can. The issues I have had in the past with x86 hardware (i cant find the data at the moment) has always been once you get into larger session counts, the x86 PCIe/bus/north/south bridge just cant cope and you start bogging machines down. This used to be a big issue and one of the reasons I moved to the CCR over x86. This is not something I have tested recently and may be fixed, but thought that while we are all looking at single and 8-12 thread performance, should really look at what happens when you put lots of big session counts into these things as well before you commit to one over another. My 2 cents. Thanks Daniel On Wed, Oct 21, 2015 at 8:52 AM, Alex Samad - Yieldbroker < Alex.Samad@yieldbroker.com> wrote:
Hmm, I didn't test ipv6, but I would presume so.
A
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Tim Warnock Sent: Tuesday, 20 October 2015 6:46 PM To: 'MikroTik Australia Public List' <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] X86
Out of interest, is it the same for IPv6?
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad - Yieldbroker Sent: Tuesday, 20 October 2015 4:43 PM To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] X86
Hi
I have to admit it was a while ago. Also I looked through the slides from Melbourne they mentioned it would be fixed in 7 ... soon :)
I had 2 VM's which were able to iperf 9.8Gb/s tcp. Place the CCR in the middle and it dropped to 1Gb/s. if I started 8 parralel tcp streams I go 8Gb/s
A
Not sure if this dup or not ..
-----Original Message-----
From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Mike Everest
Sent: Tuesday, 20 October 2015 2:46 PM
To: 'MikroTik Australia Public List' <public@talk.mikrotik.com.au>
Subject: Re: [MT-AU Public] X86
What routerOS version shows that behaviour? I know that there has been a heap of work done on multi-core queue architecture since around 6.20 to 6.28
- they claim enormous performance boost (like up to 15 times faster!) in high traffic situation.
Also, make sure that your testing methodology does not introduce some limitation. Btest, for example, is limited to 1 cpu, so if your btest client pegs a CPU, it is not necessarily indicative of a limitation with routing ;-)
Cheers!
Mike.
-----Original Message-----
From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of
Alex Samad - Yieldbroker
Sent: Tuesday, 20 October 2015 2:36 PM
To: terry@skymesh.net.au; MikroTik Australia Public List
<public@talk.mikrotik.com.au>
Subject: Re: [MT-AU Public] X86
Hi
So was that a yes or no
http://forum.mikrotik.com/viewtopic.php?f=2&t=82359 << this is a
thread I started, I have read other threads about it. Seems to be
based around the fact the CCR code base it not multi threaded another
example being the BGP
as for http://forum.mikrotik.com/viewtopic.php?t=62377 not sure what I
was supposed to get from that, those where not CCR's
sorry maybe im missing something ?
A
-----Original Message-----
From: Terry Sweetser (SkyMesh) [mailto:terry+mikrotik@skymesh.net.au]
Sent: Tuesday, 20 October 2015 1:28 PM
To: Alex Samad - Yieldbroker <Alex.Samad@yieldbroker.com>; MikroTik
Australia Public List <public@talk.mikrotik.com.au>
Subject: Re: [MT-AU Public] X86
---
On 17/10/15 06:45, Alex Samad - Yieldbroker wrote:
Question were you able to get above 1Gb single tcp stream on the CCR.
When I was testing on my ccr36 I could never get a single tcp stream
above
1Gb/s
A
_______________________________________________
Public mailing list
Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.
au
_______________________________________________
Public mailing list
Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
Sent from my smart phone _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au