Have a look from my earlier posts but I have had the Telit LE910 mini-PCIe module (which is also B28/700MHz capable) from Glyn working in PPP mode. The module I had is only CAT1 (10/5) speed. I'll need to get back to testing it some more. Even though the module is approved for Australia Mike warns you still need to approve the whole kit that the module fits into. A bit onerous considering it's still USB and really a USB stick in another package - but because it goes inside approvals need to be done. I need to do some more work with the LE910 to try get it working in LTE or USB-eth mode, not just USB-serial over which PPP works. On Mon, 24 Jun 2019, at 10:32, Aaron Chidiac wrote:
Hi All,
As many of you on this list may of experienced, a typical USB LTE modem done by Huawei (i.e E3372 or E8372) has a fun feature called ‘hilink’ which makes it near-impossible to expose the WAN IP directly from the Mikrotik (nat you can’t disable), I’ve spent quite a bit of time looking at forums/learning russian to force it into ‘stick mode’ which would allow just basic ppp but I have not been successful (flashing the stickmode firmware fails when your modem is at a certain hilink version – plus it’s a huge list to get it there so not very feasible if were selling these often)…
So my question is. Does anyone have a USB LTE modem working in Mikrotik without the NAT/DMZ/router mode? Whether it be a ppp interface or LTE.
We are aware of the newer wAP LTE Kit and have a few of them out working perfectly (Thanks DuxTel & Mike!) in passthrough mode for failover but we want to see what options are there for USBs. We have an Optus layer 2 setup so we chuck our IPs on it.
https://wiki.mikrotik.com/wiki/Manual:Peripherals is a good list; but a modem that’s listed as ‘working’ may still have the double NAT situation so we are hesitant to go out and buy 10 different USB modems to see which works.
Thanks, Aaron
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Regards, Jason Hecker <https://www.upandrunningtech.com.au/> <https://www.upandrunningtech.com.au/>