Hmmm I went from 6.22 to 6.26 6.22 didn't work at all. 6.26 worked for 1 : 1 link , didn't work when I brought up 4 nodes. Do you only have 2 nodes on a vlan ?
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Tim Warnock Sent: Wednesday, 25 February 2015 10:43 AM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] BFD + CCR1036
[admin@CCR1036] /system package> print Flags: X - disabled # NAME VERSION SCHEDULED 0 ntp 6.25 1 ppp 6.25 2 dhcp 6.25 3 ipv6 6.25 4 mpls 6.25 5 security 6.25 6 advanced-tools 6.25 7 calea 6.25 8 user-manager 6.25 9 system 6.25 10 openflow 6.25 11 routing 6.25
[admin@CCR1036] /system package> /system routerboard print routerboard: yes model: CCR1036-12G-4S serial-number: current-firmware: 3.21 upgrade-firmware: 3.21
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad - Yieldbroker Sent: Wednesday, 25 February 2015 9:41 AM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] BFD + CCR1036
What version of firmware on the ccr & hardware
/system package print ; /system routerboard print Flags: X - disabled # NAME VERSION SCHEDULED 0 routeros-tile 6.26 1 system 6.26 2 X wireless-fp 6.26 3 X ipv6 6.26 4 X wireless 6.26 5 X hotspot 6.26 6 dhcp 6.26 7 X mpls 6.26 8 routing 6.26 9 X ppp 6.26 10 security 6.26 11 advanced-tools 6.26 12 multicast 6.26 routerboard: yes model: CCR1036-8G-2S+ serial-number: current-firmware: 3.22 upgrade-firmware: 3.22
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Tim Warnock Sent: Wednesday, 25 February 2015 10:25 AM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] BFD + CCR1036
[admin@MikroTik-01] /routing ospf neighbor> print 0 instance=default router-id=192.168.22.2 address=192.168.22.2 interface=ether2 priority=1 dr-address=192.168.22.2 backup-dr-address=192.168.22.1 state="Full" state-changes=6 ls-retransmits=0 ls-requests=0 db-summaries=0 adjacency=43m27s
[admin@CCR1036] /routing ospf neighbor> print 0 instance=default router-id=192.168.22.1 address=192.168.22.1 interface=ether1 priority=1 dr-address=192.168.22.2 backup-dr-address=192.168.22.1 state="Full" state-changes=5 ls-retransmits=0 ls-requests=0 db- summaries=0 adjacency=43m52s
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad - Yieldbroker Sent: Wednesday, 25 February 2015 9:08 AM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] BFD + CCR1036
Just to add to that, I watch the bfd neighbours and it lasts till about 70seconds then fails.. I have 4 ccr's on that segment
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad - Yieldbroker Sent: Wednesday, 25 February 2015 9:58 AM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] BFD + CCR1036
/routing bfd interface> print Flags: X - disabled, I - invalid, * - default # INTERFACE INTERVAL MIN- RX MULTIPLIER 0 * all 0.2s 0.2s 5
Then I just turn on BFD for ospf.
Alex
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Tim Warnock Sent: Wednesday, 25 February 2015 9:51 AM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] BFD + CCR1036
Hi Alex,
Can you supply configs? I've got a RB2011 and a CCR1036 doing broadcast BFD with seemingly no issue.
[admin@MikroTik] /routing bfd neighbor> print detail Flags: U - up 0 U interface=ether1 address=192.168.22.1 protocols=ospf multihop=no state=up state-changes=2 uptime=10m42s desired-tx-interval=0.2s actual-tx-interval=0.2s required-min-rx=0.2s remote-min-rx=0.2s multiplier=5 hold-time=1s packets-rx=3989 packets-tx=4006
-Tim > -----Original Message----- > From: Public [mailto:public-bounces@talk.mikrotik.com.au] On > Behalf Of Alex Samad - Yieldbroker > Sent: Thursday, 19 February 2015 6:00 AM > To: 'MikroTik Australia Public List' > Subject: Re: [MT-AU Public] BFD + CCR1036 > > Hi > > Just an update seems like I spoke to soon, completed my > upgrades of my other boxes and tried to put 4 nodes together > ... failed around the > 60- 70second mark :( > > Alex > > > -----Original Message----- > > From: Alex Samad - Yieldbroker > > Sent: Saturday, 7 February 2015 7:44 AM > > To: MikroTik Australia Public List > > Subject: RE: [MT-AU Public] BFD + CCR1036 > > > > Update > > > > So I have upgraded to 6.26 and firmware upgrade to 3.22 > > > > and now it seems to be stable !!! > > I have a OSPF BFD link up for 5min... way longer than what > > I was able to get before > > > > Alex > > > > > -----Original Message----- > > > From: Alex Samad - Yieldbroker > > > Sent: Saturday, 7 February 2015 6:12 AM > > > To: MikroTik Australia Public List > > > Subject: RE: [MT-AU Public] BFD + CCR1036 > > > > > > Good I suppose, not me atleast! > > > > > > I have a thread here on the forum > > > http://forum.mikrotik.com/viewtopic.php?p=467611#p467611 > > > > > > if you can add you input > > > > > > > > > A > > > > > > > -----Original Message----- > > > > From: Public > > > > [mailto:public-bounces@talk.mikrotik.com.au] > > > > On Behalf Of Andrew Gilbett > > > > Sent: Friday, 6 February 2015 5:49 PM > > > > To: MikroTik Australia Public List > > > > Subject: Re: [MT-AU Public] BFD + CCR1036 > > > > > > > > Hi Alex, > > > > > > > > I did a test with a CCR 1009 v6.24 and a CCR1016 v6.26 > > > > linked with an SFP direct attached cable and setup > > > > ospf with BFD on the link and found that it dropped > > > > regularly every 90-150sec or so. > > > > Just a lab setup with no firewalls. > > > > > > > > Normally I do not have any issues with OSPF without BFD. > > > > > > > > Andrew > > > > > > > > > > > > On Fri, Feb 6, 2015 at 12:46 PM, Alex Samad - > > > > Yieldbroker < Alex.Samad@yieldbroker.com> wrote: > > > > > > > > > Hi > > > > > > > > > > I have a few CCR1036-8G-2S+, (6.22) I tried turning on BFD with > OSPF. > > > > > My first hurdle was BFD doesn't work by itself ! > > > > > I then associated it with a OSPF interface, which > > > > > had 4 nodes on it. > > > > > Turned it on all 4 nodes.. worked for a while then > > > > > up / down flapping > ... > > > > > I ran some tests sending flood pings down the line, > > > > > no missed packets > ! > > > > > > > > > > My final test, 2 of these boxes side by side, 1 cross over cable. > > > > > Turned on OSPF + BFD, started to fail :( > > > > > > > > > > I have a nice simple firewall rule > > > > > 10 ;;; Allow BFD > > > > > chain=input action=accept protocol=udp > > > > > dst-port=3784 log=no log-prefix="" > > > > > > > > > > I do have a drop invalid before it, but that should > > > > > affect it and for a period of time BFD does come up. > > > > > > > > > > I have it attached to one of my BGP peers on a ROS > > > > > VM, it seems to work fine. So I'm leaning toward an > > > > > issue with CCR's > > > > > > > > > > So anyone else using BFD with CCR's and OSPF ? > > > > > > > > > > Alex > > > > > > > > > > > > > > >
> > > > > Public mailing list > > > > > Public@talk.mikrotik.com.au > > > > > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. > > > > > au > > > > > > > > >
> > > > Public mailing list > > > > Public@talk.mikrotik.com.au > > > > > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. > > > > au > > _______________________________________________ > Public mailing list > Public@talk.mikrotik.com.au > http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. > au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.
au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikroti k.co m.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.co m.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au