Russell, maybe they use pppoa ? Is that possible ? Regards Paul
On 10 May 2014, at 2:22 am, "Russell Hurren" <russell@zeropointnetworks.com> wrote:
Thanks everyone for your replies. I was able to get the combination of Mikrotik + Draytek bridge + Telstra Bigpond working (had to fiddle a bit - turns out I hadn't put it in bridge mode properly). I'd already played around with the MTU/MSS settings and had to undo some of what I'd setup for the half-bridge to get it to work.
I'm still having the same problem connecting to WebVault though. I tried using a TP-Link bridge instead of a Draytek and had the same problem. I can ask WebVault if there's anything peculiar about their setup. I can see a whole lot of stuff in the logs, but not sure how much is relevant. WebVault is a small ISP, so they use other carriers (eg AAPT) for ADSL.
My immediate problem is solved though - I wanted to connect one of my clients to Bigpond using PPPoE to eliminate the possibility of half-bridge mode causing problems with his VPNs. If I have to use half-bridge for WebVault I can live with that.
Russell Hurren Managing Director Zero Point Networks PTY LTD +61 8 6262 9376
On 9 May 2014 14:46, Steve at Digitronics <steve@digitronics.com.au> wrote:
Have a number of them running OK with Siemens and Netgear modems in bridge mode, but all into Telstra Business ADSL lines. Using various MT devices from 750G up to CRS125 running ROS from 5.14 to 6.5 with no dramas.
Steve.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Russell Hurren Sent: Friday, 9 May 2014 02:20 To: public@talk.mikrotik.com.au Subject: [MT-AU Public] PPPoE client with ADSL modems
Is anyone successfully using the PPPoE client on a Mikrotik router with an ADSL bridge? I'm using Draytek Vigor 120 routers and I'm having to run them in half-bridge mode and terminate the PPPoE connection on the device rather than on the Mikrotik router. In the past I've been able to connect to Telstra Bigpond from the Mikrotik, but I'm not able to anymore and I've never been able to connect to my primary ISP (WebVault). I've used the same draytek devices in full bridge mode with other brand routers making the PPPoE connection, so I'm fairly sure the issue is with the Mikrotik PPPoE client.
I'd be interested to hear what ISP and hardware you're using if you've got this to work. I've contacted Mikrotik support and found a similar issue in the forum (http://forum.mikrotik.com/viewtopic.php?f=2&t=46384), but no-one's answering me.
Regards
Russell Hurren Managing Director Zero Point Networks PTY LTD +61 8 6262 9376 _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4570 / Virus Database: 3931/7437 - Release Date: 05/03/14