Hi, Don't forget to add the following on that interface too - Drop All firewall rule on the input chain - masquerade rule on the outbound traffic from that interface in NAT Andrew -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Chris Herrmann Sent: Friday, 22 November 2019 11:39 AM To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] NBN DHCP interface config example for Aussiebroadband HFC d'oh /ip dhcp-client now I just need the nbn outage in my area to go away... On Fri, 22 Nov 2019 at 14:36, Chris Herrmann <chrisherrmann7@gmail.com> wrote:
Hi guys,
Aussiebroadband HFC NBN getting installed today. Does anyone have some pointers for what I'm missing...
What I need to achieve is port10 acting as a DHCP client on Native VLAN.
I've broken port 10 out of the bridge, and set it to native / default VLAN 11 (because I don't want it on the default VLAN 1).
What I can't work out, is how to tell it to make the interface act as a DHCP client (which I'm guessing should in turn build default routes etc etc etc)?
I've tried creating a VLAN interface under the physical but this doesn't have any DHCP client options either...
I don't need PPPOE - I just need DHCP. Any suggestions?
Thanks!
Chris
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au