Thanks Guys, I've ended up with a DFRobot PI UPS Hat (DFR0494), a Pololu 5v->12V DC-DC Step-up convertor (POLOLU-2577), and a 6AH Lipo. On testing the RB2011, it only pulls ~200mA at 12V, so there's plenty of headroom left. Also means I can normally run the router off a normal 5V 1-2A USB supply, so it'll be happy in the car :) Thats all theory right now, should have it up and running tonight or tomorrow night :) The nice thing with the UPS Hat is it also includes the battery fuel gauge which is a nice touch! Cheers, DG On Thu, 12 Sep 2019 at 12:56, Matt Perkins <matt@spectrum.com.au> wrote:
Nice Ethernet through as well but with no A tick we cant put them out at customer premises. :(
Matt
On 12/9/19 11:31 am, Craig Askings wrote:
Now you have sent me down the rabbit hole. Found this unit that will do 24V POE.
https://smartkey.manufacturer.globalsources.com/si/6008852269623/pdtl/CCTV-p...
On 12 Sep 2019, at 11:16 am, Matt Perkins <matt@spectrum.com.au> wrote:
These work nicely with Microtik slightly off subject because it's used
https://powershield.com.au/get-wifi-plugging-dc-mini-ups/
On 12/9/19 11:10 am, Mike Everest wrote:
There's a FANTASTIC MikroTik User Meeting presentation - right there!
;-)
-----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of
Damien
Gardner Jnr Sent: Sunday, 8 September 2019 8:26 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] Lipo packs for routerboards? :)
Hi folks,
I’m in the process of turning an RB2011 (barebones board, 3D printing a case and adding antennas etc) Into a replacement for my long-standing 2*mAP ‘Travel Router’ setup. Since I’m printing my own case, and
switching from car to hotel etc has always been a pain point, I
internal batteries with 4-5hr life would be fantastic.
4-5s of Lipo would fit the job nicely, but then how to charge them? Got the idea from an awesome ‘UPS’ board that I use on my raspberry pi’s, but 5v is a lot simpler to step up to from 3.7v, than 12v is :) After a lot of googling, I’m not finding much in the way of BMS’s that support balance charging and supplying power to a load other than going for an expensive (and bulky) solar charge controller.
I was wondering if anyone has dealt with something similar before?
Thanks,
Damien
--
Damien Gardner Jnr VK2TDG. Dip EE. GradIEAust rendrag@rendrag.net - http://www.rendrag.net/ -- We rode on the winds of the rising storm, We ran to the sounds of
for backup but does work nicely. It powers a RB3011 for longer then 10 hours (I stopped timing after that and turned the power back on) power figured thunder.
We danced among the lightning bolts, and tore the world asunder _______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- /* Matt Perkins Direct 02 8916 8101 Spectrum Networks Ptd. Ltd. Office 1300 133 299 matt@spectrum.com.au Level 6, 350 George Street Sydney 2000 Spectrum Networks is a member of the Communications Alliance & TIO */
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au
http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- /* Matt Perkins Direct 02 8916 8101 Spectrum Networks Ptd. Ltd. Office 1300 133 299 matt@spectrum.com.au Level 6, 350 George Street Sydney 2000 Spectrum Networks is a member of the Communications Alliance & TIO */
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- Damien Gardner Jnr VK2TDG. Dip EE. GradIEAust rendrag@rendrag.net - http://www.rendrag.net/ -- We rode on the winds of the rising storm, We ran to the sounds of thunder. We danced among the lightning bolts, and tore the world asunder