I think Alex is on the money here, if you are talking 10G to PC's or Mac's I would go CAT6, anything connecting equipment to other equipment I would go fibre every time. Regards Paul -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad - Yieldbroker Sent: Monday, 8 August 2016 5:30 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] 10GBase-T SAN Hmm okay. So you have a bunch of Mac's that want fast file access. You are going to connect via iSCSI or nfs ? Sounds like you are in a building. So I still think 10G switch SAN storage attaches to it ( DAC cable(s) ) MAC to switch ... just like cat cabling, but run fibre... ??? but do the mac 10G adaptors do fibre ??? they might only be 10Gb-T. If so find a switch that has 10GBT and SFP+ (probably the SFP+ will be for stacking but use it to connect the NAS/SAN device). Then run fibre (or cat 6??) to the dekstops. Alex -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Ben Jackson Sent: Monday, 8 August 2016 5:20 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] 10GBase-T SAN Hi Alex, Yep it would need to be 10g from end to end as the individual iMacs will need to reap the benefit of the extra bandwidth. I.e they will be the ones streaming large files from the SAN. My thoughts were to install thunderbolt 10gbe adaptors on each iMac to allow this. The advantage being that only one connection per mac would be needed as opposed to a fibre san which would need a separate fibre connection for each client? Or maybe I'm thinking about this the wrong way? Ben On 8 Aug 2016 16:41, "Alex Samad - Yieldbroker" <Alex.Samad@yieldbroker.com> wrote:
Sounds interesting.
Q) you doing 10G from workstation to datacentre ? or just the cluster of servers in the DC.
I personally like SFP+ modules- you can choice between fibre or ... if I can't use SMOF, or if it's in the same rack, I go with DAC cables. They have the SFP and cable pre attached .. you can be a bit more rough with them compare to fibre.
It sounds like a rack with servers, storage and switching.
So Office -> rack area ??? not sure depends on run
Server -> switch ... DAC Switch -> storage .. DAC
Alex
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Ben Jackson Sent: Monday, 8 August 2016 4:35 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] 10GBase-T SAN
Hi all,
I'm looking at implementing a iSCSI SAN / NAS hybrid solution for one of my clients who runs a production studio (24bit multi-track audio and up to 4k video collaboration).
I haven't, however had any experience with installing 10Gbe networks as yet, and know very little about them apart from that cat6a is required to go over 100m and that latency is higher with copper vs SFP+.
My initial reaction was to go with 10GBase-T as it's a familiar format to me (especially where running cable is concerned) but I'm happy to be convinced on the merits of running fibre.
Does anyone have any experiences they can share on this topic?
Thanks,
Ben Jackson eLogik m:0404 924745 e: ben@elogik.net w: www.elogik.com.au [image: http://www.elogik.com.au] <http://www.elogik.com.au> _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au