Hi guys, has anybody managed to get vlans via the switch chip working in a new CCS ? I am trying to do the simplest thing but it just doesn't seem to work. Running ROS6.13 I am trying to bring some VLAN's into the SFP port one as a trunk and trunk them back out ether2, should be a simple task, in Cisco I create the vlan set the two ports as trunk ports and add the vlans onto the ports as members, easy, but in the CCS I can't get it to work. I have read heaps of doco and looked at examples and everything I seem to be doing is correct but it just won't work. When I torch the interfaces I can see the vlan traffic, but on the devices on the other side or at least the one side I can see it's not working. The CCS worked fine with the SFP port configured using the traditional ROS vlan configuration but I can't get it to work with the switch chip. Any suggestions or experience here ? Regards Paul