Just upgraded my primary here (as an evaluation before hurting my customers) Hopefully you get this :D — Denis Hancock Chief Technical Officer / Director Helpdesk 1300 139 593 Mobile 0407 687 621 Unit 15, 5 Enterprise Drive, Rowville 3178 Australian Information Security Association (AISA) Member This email is intended only for the addressed and is subject to copyright. If you have received this email in error, please notify the sender immediately.
On 8 Dec 2021, at 09:47, Andrew Gilbett <andrew@gilbett.net> wrote:
So I guess everyone is busy testing V7.1 (Stable) _______________________________________________ Public mailing list Public@talk.mikrotik.com.au https://www.google.com/url?q=http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au&source=gmail-imap&ust=1639522209000000&usg=AOvVaw0EhKluxday3kuMP3lS0982
I notice BFD isn’t currently supported according to https://help.mikrotik.com/docs/display/ROS/v7+Routing+Protocol+Status, so the only things I could currently upgrade are also things that aren’t running in a redundant arrangement, so wouldn’t want to upgrade them first.. Hopefully doesn’t take them long to get BFD support happening :) —DG On Wed, 8 Dec 2021 at 9:53 am, Denis Hancock <denis.hancock@samurai.com.au> wrote:
Just upgraded my primary here (as an evaluation before hurting my customers) Hopefully you get this :D
— Denis Hancock Chief Technical Officer / Director
Helpdesk 1300 139 593 Mobile 0407 687 621
Unit 15, 5 Enterprise Drive, Rowville 3178
Australian Information Security Association (AISA) Member
This email is intended only for the addressed and is subject to copyright. If you have received this email in error, please notify the sender immediately.
On 8 Dec 2021, at 09:47, Andrew Gilbett <andrew@gilbett.net> wrote:
So I guess everyone is busy testing V7.1 (Stable) _______________________________________________ Public mailing list Public@talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- Damien Gardner Jnr VK2TDG. Dip EE. GradIEAust rendrag@rendrag.net - http://www.rendrag.net/ -- We rode on the winds of the rising storm, We ran to the sounds of thunder. We danced among the lightning bolts, and tore the world asunder
I have it running on my RB3011, I have noticed CPU usage is peaking quite a bit higher (not to any point where its affecting performance) and device backup files are smaller than their 6.x counterparts. All *seems* to be working ok, my CAPsMAN AP's are registering devices correctly, OpenVPN is working ok. Only probelm is I had to remove and re-add all my NTP servers as it didnt seems to want to talk to the ones imported from the 6.49 config I had, once I re-added the ntp.org ones it synced right up. So far so good. On 08-12-2021 09:47, Andrew Gilbett wrote:
So I guess everyone is busy testing V7.1 (Stable) _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
I've had 7.1 running on a CCR2004-1G-12S-2XS since about release candidate 4 without any issues (albeit with a comparatively simple configuration). Sucks about the missing features such as BFD, but I'm expecting those will come along in fairly short order. In fact if I were a betting person, I'd wager that one or more of the head honchos at MikroTik put the screws on the team to get a v7.x stable release out the door by the end of 2021, and that's why there's a few things still missing. On Wed, 8 Dec 2021 at 10:11, Jim Woodward <jim@alwaysnever.net> wrote:
I have it running on my RB3011, I have noticed CPU usage is peaking quite a bit higher (not to any point where its affecting performance) and device backup files are smaller than their 6.x counterparts. All *seems* to be working ok, my CAPsMAN AP's are registering devices correctly, OpenVPN is working ok.
Only probelm is I had to remove and re-add all my NTP servers as it didnt seems to want to talk to the ones imported from the 6.49 config I had, once I re-added the ntp.org ones it synced right up.
So far so good.
On 08-12-2021 09:47, Andrew Gilbett wrote:
So I guess everyone is busy testing V7.1 (Stable) _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
participants (5)
-
Andrew Gilbett -
Damien Gardner Jnr -
Denis Hancock -
Jim Woodward -
Matthew Kobayashi