Hi Dave, If you have default-authenticate=yes on the main wlan interface profile, then access controls might be overridden. Try turning off that default-authenticate option and see if that makes a difference. You'll need to add an ACL rule to match all other clients though, to let them authenticate also ;) Cheers! Mike.

-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of David Ryan Sent: Sunday, 17 April 2016 3:49 PM To: public@talk.mikrotik.com.au Subject: [MT-AU Public] capsman v2

Howdy All,

thought I would post here as I cannot seem to find "New Topic" on forum.mikrotik.com but that's another story.

Anywho, I setup capsman V2 on 6.35 today. The CAP is also running 6.35.

All is running well. I decided to try limiting AP TX speed to 512k to the client. So I added an access rule. Whatever I try does not seem to work.

Here is what I have so far:

[dsryan@MikroTik] /caps-man> export # apr/17/2016 15:44:10 by RouterOS 6.35 # software id = S2JW-EBR4 # /caps-man configuration add country=australia datapath.bridge=capsnet distance=indoors name=captest security.authentication-types=\ wpa2-psk security.encryption=aes-ccm security.group-encryption=aes-ccm security.passphrase=qwerty123 \ ssid=captest /caps-man access-list add ap-tx-limit=512000 disabled=no mac-address=34:FC:EF:A9:C7:E0 ssid- regexp="" /caps-man manager set enabled=yes /caps-man provisioning add action=create-dynamic-enabled master-configuration=captest name- prefix=HAT

I have a capsman V1 running at another site using an access list there and all is well. Is this a "feature" or am I having a blonde moment?

Thanks, Dave.

-- David Ryan - 0402 054 426 RJS Communications dsryan@rjs.com.au MTCNA, MTCWE, MTCRE _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au