Has anybody got the later versions of ROS to respond from the correct IP when querying a loopback address with SNMP ? In 6.40 I think they implemented a source address option in the SNMP configuration but it doesn't seem to work on a Dynadish I am configuring at the moment. I am running the latest bugfix version and it seems to work ok on other devices like RB1100AHx4 but not on the Dynadish, not sure why there would be a difference. Any thoughts besides netinstall ? Not sure why it's giving me grief... Thanks Paul
Hi paul, Have you considered src-nat on output packets? ip firewall nat add chain=src-nat proto=udp src-port=161 <dst-address=snmp-manager-ip> action=src-nat to-address=<loopback-address> Cheers! Mike.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Paul Julian Sent: Tuesday, 5 February 2019 1:50 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] SNMP Query to Loopback
Has anybody got the later versions of ROS to respond from the correct IP when querying a loopback address with SNMP ?
In 6.40 I think they implemented a source address option in the SNMP configuration but it doesn't seem to work on a Dynadish I am configuring at the moment. I am running the latest bugfix version and it seems to work ok on other devices like RB1100AHx4 but not on the Dynadish, not sure why there would be a difference.
Any thoughts besides netinstall ?
Not sure why it's giving me grief...
Thanks Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Thanks Mike, yes I have that as an option for sure, I'm just perplexed why this might happen on one router and not another, very strange indeed. Worst case is I query the interface address, but I just thought that the change they made to the SNMP agent would have fixed this, maybe not. Regards Paul -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Mike Everest Sent: Tuesday, 5 February 2019 1:58 PM To: 'MikroTik Australia Public List' <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] SNMP Query to Loopback Hi paul, Have you considered src-nat on output packets? ip firewall nat add chain=src-nat proto=udp src-port=161 <dst-address=snmp-manager-ip> action=src-nat to-address=<loopback-address> Cheers! Mike.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Paul Julian Sent: Tuesday, 5 February 2019 1:50 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] SNMP Query to Loopback
Has anybody got the later versions of ROS to respond from the correct IP when querying a loopback address with SNMP ?
In 6.40 I think they implemented a source address option in the SNMP configuration but it doesn't seem to work on a Dynadish I am configuring at the moment. I am running the latest bugfix version and it seems to work ok on other devices like RB1100AHx4 but not on the Dynadish, not sure why there would be a difference.
Any thoughts besides netinstall ?
Not sure why it's giving me grief...
Thanks Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
participants (2)
-
Mike Everest
-
Paul Julian