Hi Steve! Is access to that device over the dodgy interface? If so, could be some kind of MTU issue perhaps? What frequency is the link flapping? Are we talking many times per hour, minute, second? Is it possible to check the cable, or re-terminate the ends? Perhaps try putting another device on the ends (like mAP-2n) to determine whether the problem follows any particular end of the cable, or device? Cheers, Mike.

-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Steve Hille Sent: Friday, 2 September 2016 7:30 PM To: public@talk.mikrotik.com.au Subject: [MT-AU Public] Webfig access error

Hi folks,

I am getting the following error on a Mikrotik switch and an AP

Error 406: Not Acceptable

I have tried in Chrome, Firefox and IE and I get the same flavour of each message regardless of which browser I choose. I am able to log in via Winbox. I recently upgraded them to the latest OS but still no good.

I also noticed that the link from the switch to the AP is continually going up and down, I tried to hard set it to 100 full which slowed it down a little but it's still continually going up and down, does anyone have any suggestions?

Cheers,

Steve _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au