Hi All, Has anyone had luck with setting channels in a CAPsMAN config? Whenever I try to set channels, regardless of it be 2 or 5 ghz, all cAP's report "No supported channel" - The location in the configuration is set to Australia and from what I'm reading the frequencies and width's I'm trying to set are all within AU spec. For reference, this particular deployment is CCR CAPsMAN and 30 odd RBwAPG-5HacT2HnD cAP's all running the latest release channel Cheers, Dave Browning | Network Engineer P 1300 791 678 Level 1, 12 Railway Tce, Milton QLD 4064
Are you using channel numbers or frequency in MHz? I set my 2.4GHz channels to 2412 2437 2462 which are channels 1 6 and 11. On Thu, 14 Jun. 2018, 10:45 Dave Browning, <dave@sentrian.com.au> wrote:
Hi All,
Has anyone had luck with setting channels in a CAPsMAN config? Whenever I try to set channels, regardless of it be 2 or 5 ghz, all cAP's report "No supported channel" - The location in the configuration is set to Australia and from what I'm reading the frequencies and width's I'm trying to set are all within AU spec.
For reference, this particular deployment is CCR CAPsMAN and 30 odd RBwAPG-5HacT2HnD cAP's all running the latest release channel
Cheers, Dave Browning | Network Engineer P 1300 791 678 Level 1, 12 Railway Tce, Milton QLD 4064 _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
participants (2)
-
Dave Browning
-
Jason Hecker (Up & Running Tech)