*solved my problem..* *I am using MD5 auth and by default ROS uses index 1 on the pa indexing can start at 0... so mis match of auth so no ospf so no bfd..* *A* On 9 May 2017 at 12:03, Mike Everest <mike@duxtel.com> wrote:

Hi Alex,

Did you try debug logging on MT for BFD?

/system loggin add topics=debug,bfd action=memory

Cheers, Mike.

...

-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Alex Samad Sent: Tuesday, 9 May 2017 11:52 AM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] BFD /OSPF with PA-3060

Hi

trying to setup OSPF with BFD between ccr1036 and PA-3060.

the CCR can see the OSPF init, but fails because of BFD.

I have 2 PA's and they can see each other !

when i check /routing bfd neighbor> print detail

I see no rx for the PA's to the CCR.

Alex _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au

_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au