Hi Guys, Been playing with GNS3 and ROS and it seems to work well. I have been developing a MPLS test bed to play with. I am using the CHR with no license applied it is just the Free license which should be fine just a speed limit of 1Mbps. I have been trying to get a bgp signaled VPLS to work... but I am not getting a full mesh of connectivity. Diagram at link below. https://paste.pics/88be8dae7c194ad981b142e6655473b8 Router Configs are below https://pastebin.com/xaGDCtR8 I am not able to get traffic between CE1 and CE2 but all other connectivity works... I can see that the VPLS is established between PE1 and PE2 but no traffic traverses it... I am only trying to ping so the packet size should be small... so not an MTU issue yet... If anyone has any ideas that would be most helpful, I suspect that it is something simple. Andrew