Hi All Has anyone been able to mirror ports ? /interface switch set mirror-source=ether3 mirror-target=ether4 # failure: port mirroring not supported :( -- *Denis Hancock* Chief Technical Officer / Director Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621> Member AISA OWASP VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2> <https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock> This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses.
The CCR1009-7G doesn't have a switch chip, so that won't be an option. -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Denis Hancock Sent: Wednesday, 15 November 2017 10:12 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] CCR1009-7G - Port Mirroring Hi All Has anyone been able to mirror ports ? /interface switch set mirror-source=ether3 mirror-target=ether4 # failure: port mirroring not supported :( -- *Denis Hancock* Chief Technical Officer / Director Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621> Member AISA OWASP VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2> <https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock> This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Awww - read this https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features On 15 November 2017 at 13:18, Russell Hurren <russell@zeropointnetworks.com> wrote:
The CCR1009-7G doesn't have a switch chip, so that won't be an option.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Denis Hancock Sent: Wednesday, 15 November 2017 10:12 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] CCR1009-7G - Port Mirroring
Hi All
Has anyone been able to mirror ports ?
/interface switch set mirror-source=ether3 mirror-target=ether4
# failure: port mirroring not supported
:(
--
*Denis Hancock* Chief Technical Officer / Director
Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621>
Member AISA OWASP
VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2>
<https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock>
This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- *Denis Hancock* Chief Technical Officer / Director Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621> Member AISA OWASP VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2> <https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock> This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses.
Yep, the previous model, CCR1009-8G had ports 1-4 attached to a switch chip. That was removed with the first revision to allow gigabit speeds to all ports at once, along with adding in the combo port. -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Denis Hancock Sent: Wednesday, 15 November 2017 10:25 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] CCR1009-7G - Port Mirroring Awww - read this https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features On 15 November 2017 at 13:18, Russell Hurren <russell@zeropointnetworks.com> wrote:
The CCR1009-7G doesn't have a switch chip, so that won't be an option.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Denis Hancock Sent: Wednesday, 15 November 2017 10:12 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] CCR1009-7G - Port Mirroring
Hi All
Has anyone been able to mirror ports ?
/interface switch set mirror-source=ether3 mirror-target=ether4
# failure: port mirroring not supported
:(
--
*Denis Hancock* Chief Technical Officer / Director
Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621>
Member AISA OWASP
VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2>
<https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock>
This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
-- *Denis Hancock* Chief Technical Officer / Director Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621> Member AISA OWASP VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2> <https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock> This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
The original CCR1009-8G-1S-1S+ had the switch chip, but was superseded by the CCR1009-7G-1C-1S+ which no longer features the switch chip. Mikrotik can be slow at updating their documentation sometimes :( we're only human, after all! Regards, Ben -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Denis Hancock Sent: Wednesday, 15 November 2017 12:25 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] CCR1009-7G - Port Mirroring Awww - read this https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features On 15 November 2017 at 13:18, Russell Hurren <russell@zeropointnetworks.com> wrote:
The CCR1009-7G doesn't have a switch chip, so that won't be an option.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Denis Hancock Sent: Wednesday, 15 November 2017 10:12 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] CCR1009-7G - Port Mirroring
Hi All
Has anyone been able to mirror ports ?
/interface switch set mirror-source=ether3 mirror-target=ether4
# failure: port mirroring not supported
:(
--
*Denis Hancock* Chief Technical Officer / Director
Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621>
Member AISA OWASP
VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2>
<https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock>
This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
-- *Denis Hancock* Chief Technical Officer / Director Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621> Member AISA OWASP VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2> <https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock> This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
I just checked one of our CCR1009-8G-1S-1S+ and I can do port mirroring as it has that Atheros chip. Checked a CCR1009-7G-1C-1S+ and no luck, no switch chip. -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Denis Hancock Sent: Wednesday, 15 November 2017 12:25 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] CCR1009-7G - Port Mirroring Awww - read this https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features On 15 November 2017 at 13:18, Russell Hurren <russell@zeropointnetworks.com> wrote:
The CCR1009-7G doesn't have a switch chip, so that won't be an option.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Denis Hancock Sent: Wednesday, 15 November 2017 10:12 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] CCR1009-7G - Port Mirroring
Hi All
Has anyone been able to mirror ports ?
/interface switch set mirror-source=ether3 mirror-target=ether4
# failure: port mirroring not supported
:(
--
*Denis Hancock* Chief Technical Officer / Director
Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621>
Member AISA OWASP
VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2>
<https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock>
This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
-- *Denis Hancock* Chief Technical Officer / Director Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621> Member AISA OWASP VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2> <https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock> This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Thanks All On 15 November 2017 at 13:32, Dave Browning <dave@sentrian.com.au> wrote:
I just checked one of our CCR1009-8G-1S-1S+ and I can do port mirroring as it has that Atheros chip. Checked a CCR1009-7G-1C-1S+ and no luck, no switch chip.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Denis Hancock Sent: Wednesday, 15 November 2017 12:25 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] CCR1009-7G - Port Mirroring
Awww - read this https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_ Features
On 15 November 2017 at 13:18, Russell Hurren < russell@zeropointnetworks.com> wrote:
The CCR1009-7G doesn't have a switch chip, so that won't be an option.
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Denis Hancock Sent: Wednesday, 15 November 2017 10:12 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: [MT-AU Public] CCR1009-7G - Port Mirroring
Hi All
Has anyone been able to mirror ports ?
/interface switch set mirror-source=ether3 mirror-target=ether4
# failure: port mirroring not supported
:(
--
*Denis Hancock* Chief Technical Officer / Director
Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621>
Member AISA OWASP
VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2>
<https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock>
This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
--
*Denis Hancock* Chief Technical Officer / Director
Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621>
Member AISA OWASP
VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2>
<https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock>
This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- *Denis Hancock* Chief Technical Officer / Director Helpdesk 1300 139 593 <1300139593> Mobile 0407 687 621 <0407687621> Member AISA OWASP VIC Unit 15, 5 Enterprise Drive, Rowville 3178 <https://goo.gl/maps/HGmhhNncEF12> QLD (Arcare) 14/8 Metroplex Ave, Murrarie 4172 <https://goo.gl/maps/dfeKUES6NbD2> <https://samurai.com.au> <https://www.facebook.com/samuraiconsulting.melbourne> <https://au.linkedin.com/in/denishancock> This email is intended only for the addresses(s) and is subject to copyright. If you have received this email in error, please notify the sender immediately, do not use or disclose the contents and delete the message and any attachments to this email. We cannot accept any liability for any loss or damage caused by software viruses.
participants (4)
-
Ben Farmer -
Dave Browning -
Denis Hancock -
Russell Hurren