Hi Any one tried this. Went to upgrade my test CCR and found it was available, thought I would be a bit adventurous. Behaving itself okay so far. Alex
I upgraded my CCR1009 to 6.22 on Friday morning. Seems to lock up (ui-wise) a lot less when touching routes. it's a little heavier on CPU (i have 1 cpu core *always* at 100% now, rather than having little blips below 100% occasionally on my observium graphs), but I actually have two full routing tables loaded now (512k from each), rather than having one at 512k and the second not managing to get much above 200k. Which is a Good Thing (TM). I also don't loose all connectivity for 30-60 seconds when I shutdown a peer now, which is a VERY Good Thing (TM). On 17 November 2014 17:54, Alex Samad - Yieldbroker < Alex.Samad@yieldbroker.com> wrote:
Hi
Any one tried this. Went to upgrade my test CCR and found it was available, thought I would be a bit adventurous.
Behaving itself okay so far.
Alex
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
-- Damien Gardner Jnr VK2TDG. Dip EE. GradIEAust rendrag@rendrag.net - http://www.rendrag.net/ -- We rode on the winds of the rising storm, We ran to the sounds of thunder. We danced among the lightning bolts, and tore the world asunder
participants (2)
-
Alex Samad - Yieldbroker
-
Damien Gardner Jnr